There are protective treatments available for microcement surfaces.

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Protective Treatments for Microcement

There are specific protective treatments for microcement that help preserve its appearance and extend its lifespan over time. Here are some useful details:

• Sealers: Sealants for microcement create a protective barrier on the surface, making it resistant to stains, wear, and moisture. These sealants are available in matte or glossy finishes, depending on the desired effect.

• Waxes or Resins: Waxes or resins for microcement provide shine and protection to the surface. They can be used to enhance color vibrancy and increase resistance to daily stress.

• Protective Varnishes: Specific varnishes for microcement form a transparent, abrasion-resistant layer that helps maintain the aesthetic appeal of microcement over time.

• Periodic Maintenance: It is advisable to periodically apply a protective treatment on microcement to ensure its durability. Following the manufacturer's instructions and paying attention to cleaning and maintenance methods are essential to preserve the surface quality.

Using appropriate protective treatments for microcement is crucial to ensure longevity and preserve its original appearance over time. Consult a professional in the field for guidance on choosing the most suitable treatment for your needs and proper application.

Most Effective Protective Products for Microcement

Effective protective products are essential for preserving and prolonging the lifespan of microcement. Here are some recommended types of products:

• Resin-Based Sealants: Sealants based on resins are among the most effective products for protecting microcement. These sealants create a protective layer resistant to water, wear, and stains, helping maintain the appearance of the coating.

• Protective Waxes or Varnishes: Specific waxes or varnishes for microcement provide additional protection by creating a barrier against scratches, abrasions, and chemical agents. Make sure to choose products designed specifically for microcement.

• Transparent Top Coats: Transparent top coats are useful for adding extra resistance and shine to microcement. These products can be applied over the sealant to provide an additional layer of protection and make the floor easier to clean.

• UV Protectors: For areas exposed to direct sunlight, using UV protective products is advisable to prevent fading caused by sunlight, maintaining the original color of the coating.

Choosing the right protective products and carefully following application instructions are essential to ensure effective and long-lasting protection for your microcement floor.

Applying a Protective Treatment on Microcement

To apply a protective treatment on microcement and ensure its durability, follow these steps carefully:

• Cleaning: Ensure the surface is clean, dry, and free of dust, dirt, or grease. Use neutral detergents and rinse thoroughly.

• Pre-Treatment: If necessary, apply a specific primer for microcement to improve the adhesion of the protective treatment.

• Application:
• Choose a suitable protective treatment for microcement, such as resins or transparent silicones.
• Use a short-haired roller or a rubber spatula to evenly spread the product on the surface.
• Respect drying times and apply any subsequent layers following the manufacturer's instructions.

• Maintenance: After application, avoid exposing the surface to corrosive agents and regularly clean with gentle products to preserve its appearance and resistance.

Remember that correctly applying a protective treatment on microcement is essential to protect it from wear, stains, and moisture, maintaining its beauty and durability over time.

How Often Should a Protective Treatment be Applied on Microcement

Applying a protective treatment on microcement regularly is essential to keep the surfaces protected and in excellent condition over time. Here are some general guidelines for application frequency:

• Initial Treatment: After installing microcement, it is crucial to apply an initial protective treatment to ensure surface resistance and durability.

• Regular Maintenance: Generally, it is recommended to reapply the protective treatment every 1-2 years, depending on wear and usage. In high-traffic areas or under specific stresses, more frequent maintenance may be necessary.

• Visual Inspection: In addition to periodic reapplication, conducting a visual inspection of the surface is important to identify signs of wear, damage, or loss of protection. Prompt corrective actions are advisable in case of issues.

• Daily Cleaning and Care: In addition to periodic protection, maintaining daily cleanliness and care with specific products and recommended procedures is essential to preserve the beauty and durability of microcement over time.

By following these guidelines and adjusting the application frequency of the protective treatment to the specific needs of the surface, it is possible to keep microcement in excellent condition for a long time.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85