Free shipping on orders over £29,85 
Shipping Tracking! 
Google
Facebook← Back to how to glue two resin objects together
For the strongest and most reliable bond between two resin objects, careful surface cleaning is a must. This crucial preparation step ensures your adhesive performs to its full potential.
Why Cleaning Resin Surfaces Matters
Any dust, oils, or fingerprints on resin will act as a barrier, weakening the bond and increasing the risk of joints coming apart. Cleaning both surfaces thoroughly removes these contaminants and gives the glue direct contact with the resin, maximising adhesion.
Step-by-Step Cleaning Guide
- Wash the resin parts with warm water and a mild, residue-free detergent to eliminate surface grime.
- Rinse thoroughly and let the pieces dry completely to avoid trapping moisture in the joint.
- Degrease the area with isopropyl alcohol or a suitable solvent using a lint-free cloth. Avoid touching the cleaned surface with bare hands afterwards.
- Lightly sand glossy areas with fine-grit sandpaper for enhanced mechanical grip, especially on smooth or highly polished resin.
Choosing an Adhesive After Cleaning
Once your resin pieces are spotless and dry, you’re ready to apply adhesive. Klebfix Two-Component Epoxy Glue is highly effective for joining clean resin objects, setting quickly and providing reliable strength. Always follow the glue’s application instructions for best results.
When Meticulous Cleaning is Essential
If your project is load-bearing, exposed to water, or must be handled frequently, any residue can shorten the life of the bond. For these critical applications, extra care with cleaning maximises durability.
Related products
Related guides
Properly cleaned resin surfaces set the stage for a truly secure bond. For further tips on achieving the strongest glue joints, visit our parent page guide.