What You’ll Need

• “One-2-One” – Epoxy Resin for Handcraft, 1:1 Mixing Ratio
• “Art Pro Deluxe” – Ultra-High Viscosity Epoxy Resin for Artists
• “Art Pro” – Clear Epoxy Resin for Artists and Surface Coating
• “Liquidissima” – Epoxy Resin For Creations & Jewellery
• Protective gloves and apron
• Disposable mixing cups and stirring sticks
• Silicone moulds or artwork surfaces
• Measuring tools (by weight or volume as specified)
• Dust cover or box

Key Tools and Setup for Successful Resin Art

Gather all materials beforehand for a seamless start. Preparation is vital: ensure clean surfaces, protective gloves, and precise measuring tools are ready. Dedicate a workspace free from dust and direct sunlight to optimise your results.

Step 1: Prepare Your Workspace and Materials

Arrange all your materials on a stable, level surface. Work in a dust-free, well-ventilated environment to prevent impurities from affecting the outcome. Protect your workspace with plastic sheeting or disposable covers and have paper towels ready for any accidental spills. Ensure all moulds or art surfaces are clean and completely dry before use, as any moisture can interfere with resin curing and clarity.

Step 2: Measure and Mix the Resin Accurately

Determine if your resin product requires mixing by volume or weight. For example, “One-2-One” – Epoxy Resin for Handcraft, 1:1 Mixing Ratio uses a simple 1:1 ratio by volume, while other options like “Art Pro” – Clear Epoxy Resin for Artists and Surface Coating need a 3:2 ratio by weight. Always check product instructions and use dedicated measuring cups. Pour the resin and hardener separately before combining in a clean container. Ensure accurate mixing of resin and hardener by stirring slowly for at least 3 minutes, scraping the sides and bottom.

Step 3: Pour, Cast, or Apply the Resin

After thorough mixing, immediately pour the resin into your chosen mould, tray, or onto an artwork surface. Low viscosity options like “Liquidissima” – Epoxy Resin For Creations & Jewellery are perfect for detailed jewellery and intricate designs, as they flow easily into complex moulds. For painting effects or glossy coatings on larger pieces, higher viscosity products such as “Art Pro Deluxe” – Ultra-High Viscosity Epoxy Resin for Artists offer better line control and brilliant definition. Pour slowly to minimise air bubbles and use a toothpick or heat gun to remove any that surface.

Step 4: Cure and Finish Your Resin Work

Once poured, cover your piece with a dust guard. Allow the resin to cure undisturbed at the recommended temperature for the time stated in the product information—usually between 12 and 24 hours. Once cured, demould gently or remove masking tape from artwork edges. If required, sand any sharp edges or polish the surface for an extra-glossy effect. Proper curing ensures your piece remains clear, glossy, and durable.

Tips, Common Mistakes, and Troubleshooting

Always follow precise ratios, as inaccurate mixing can cause sticky, soft, or cloudy results. Work quickly but thoroughly to avoid premature thickening. If bubbles appear, use a fine heat tool to dissipate them. Ensure environmental conditions are stable—high humidity or low temperatures can impact both curing and clarity. Avoid touching or moving your project during the initial hours to preserve a flawless, dust-free finish.

Curing and Display: Bringing Your Resin Art to Life

Patience during curing pays off with clear, professional-looking pieces. Use a cover or box to protect from airborne dust, and let your artwork rest until fully set. This careful attention at every stage helps you achieve beautiful, gallery-ready resin creations.