Applying a uniform layer

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Applying a uniform layer

To apply a uniform layer of epoxy resin or silicone on a surface, it is important to follow some fundamental guidelines. First of all, make sure the surface is clean, dry, and free from dust or grease. Use a brush, a spatula, or a roller to evenly spread the material, working quickly and efficiently to avoid irregularities. Be sure to follow the manufacturer's instructions regarding mixing and working time. Finally, periodically check the thickness of the layer with a thickness gauge to ensure a uniform and high-quality application.

**Epoxy Resin Application Technique**

To effectively apply epoxy resin, it is essential to follow a precise technique to achieve optimal results. Here's how to proceed:

1. Preparation: Ensure that the surface is clean, dry, and free of dust or grease.
2. Measurement: Precisely measure the resin and hardener according to the manufacturer's instructions.
3. Mixing: Combine the two components and mix thoroughly for at least 2-3 minutes.
4. Application: Pour the resin onto the surface and evenly spread it with a brush or a notched trowel.
5. Leveling: Use a roller to remove any air bubbles and level the resin.
6. Drying: Allow the resin to dry following the recommended curing times. By following this technique, you can apply epoxy resin professionally and achieve a high-quality final result.

How to Achieve a Smooth Surface with Epoxy Resin

To achieve a smooth surface with epoxy resin, follow these steps:

1. Prepare the surface: Ensure that the surface is clean, dry, and free of dust or grease.
2. Mix the epoxy resin: Follow the manufacturer's instructions carefully to mix the resin and the hardener in the correct ratio.
3. Apply the resin: Pour the resin on the area to be coated and spread it evenly with a brush or spatula.
4. Remove air bubbles: Pass a blowtorch or a warm brush over the surface to eliminate any trapped air bubbles.
5. Let it dry: Respect the recommended drying times before applying any additional layers. By carefully following these steps, you will achieve a smooth and uniform surface with epoxy resin.

Tips for applying resin evenly

To apply resin evenly, follow these practical tips:

• Ensure that the surface is clean, dry, and level.
• Measure the amount of epoxy or polyurethane resin needed accurately.
• Thoroughly mix the resin components following the manufacturer's instructions.
• Use a specific brush or roller for resins to apply the layer evenly.
• Work in well-ventilated areas and at recommended temperatures to avoid air bubbles or streaks.
• Level the resin with a scraper or spatula to ensure even distribution.
• Cover the object with a lid or dome to protect it from dust during curing. By following these suggestions, you will achieve a smooth and uniform final result in resin application.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85