**Guide to Mixing ResinHardener Ratios**

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

**Guide to Mixing ResinHardener Ratios**

The proper mixing of ratios between resin and hardener is crucial to achieve optimal results in resin projects. Generally, the recommended ratios vary depending on the type of resin and hardener used. However, a common ratio is 2 parts resin to 1 part hardener. It is important to carefully follow the manufacturer's instructions to ensure proper catalysis and material hardening. Precisely measure the quantities and mix thoroughly to avoid issues of incomplete or excessive hardening. Remember that an incorrect mix can compromise the quality and durability of your resin project.

- Epoxy Resin Mixing Ratios Guide

Getting the epoxy resin ratios right is crucial to achieve optimal results in DIY projects. Typically, epoxy resin consists of two components: resin and hardener, which need to be mixed following the manufacturer's instructions. The most common ratios are 1:1 or 2:1 (resin:hardener), but it is important to check the specific instructions of the product being used. Accurately measuring the quantities and thoroughly mixing ensures a uniform and durable polymerization. Carefully follow the recommendations on the amount to mix to avoid issues with incomplete or excessive catalysis.

Calculating epoxy resin dosage

The calculation of the epoxy resin dosage depends on the amount of resin needed to cover the desired surface. To determine the correct dosage, it is essential to take into account the surface to be coated and the desired thickness of the coating. In general, the dosage is expressed in weight or volume and may vary depending on the type of epoxy resin used. It is crucial to carefully follow the manufacturer's instructions to achieve optimal results. It is also recommended to consider the possibility of using a hardener to ensure proper polymerization of the epoxy resin.

**Rules for Measuring Epoxy Resin**

Measuring epoxy resin is crucial to achieve optimal results in DIY coating and crafting projects. Here are some rules to follow:

1. Accurately respect the mixing ratios between epoxy resin and hardener to avoid polymerization issues.
2. Use a digital scale to precisely weigh the two components.
3. Mix vigorously for at least 2-3 minutes, scraping the sides and bottom of the container well.
4. Pour the mixture onto a flat surface to ensure even distribution.
5. Adhere to the working and drying times indicated by the manufacturer to ensure coating durability.

Correct hardener dosage for epoxy resin

The correct dosage of hardener for epoxy resin depends on the type of resin and the desired effect. In general, it is recommended to carefully follow the manufacturer's instructions on the packaging. However, as a general guideline, a standard dosage of 2-3% hardener relative to the total weight of the resin can be considered. It is important to maintain a precise ratio to avoid issues of incomplete or excessive hardening. Before proceeding, make sure to calculate the quantities accurately and thoroughly mix the two components to ensure uniform polymerization. If in doubt, it is always advisable to carry out preliminary tests to determine the optimal dosage.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85