Guide to Using Metallic Pigments in Epoxy Resin

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Guide to Using Metallic Pigments in Epoxy Resin

Metallic pigments are special colorants used to give a metallic effect to epoxy resins. To achieve optimal results, carefully follow this guide for using metallic pigments in resin:

1. Prepare the epoxy resin as indicated by the manufacturer.
2. Add the metallic pigments in small quantities to the resin, mixing thoroughly to avoid clumps.
3. Experiment with different pigment concentrations to achieve the desired effect.
4. Work quickly, as the resin has a limited working time.
5. Pour the colored resin into your molds or surfaces, leveling carefully.
6. Allow the resin to cure following the recommended drying times.
7. Finally, seal the surface with a clear coating to protect and enhance the metallic effect. By following these instructions, you can create stunning resin artifacts with metallic pigments.

**Mixing Pigments in Epoxy Resin**

Mixing pigments into resin is a crucial process to achieve customized and uniform colors in resin products. Here are some techniques to follow:

1. Precise Weighing: Measure pigments accurately to obtain the desired color.
2. Mix Slowly: Stir the pigments into the resin slowly to prevent the formation of air bubbles.
3. Use Compatible Pigments: Ensure that the pigments used are compatible with the resin to avoid undesired reactions.
4. Color Testing: Before pouring the colored resin into your project, perform a test on a sample to evaluate the final result. By following these techniques, you can achieve homogeneous and high-quality colors in your epoxy resin products.

Tutorial: Creating Metallic Effects with Epoxy Resin

To achieve metallic effects with epoxy resin, it is important to follow some key steps:

1. Preparation: Make sure you have high-quality transparent resin and suitable metallic pigments.
2. Mixing: Mix the resin according to the manufacturer's instructions and add the metallic pigment. Stir thoroughly to avoid lumps.
3. Application: Pour the colored resin onto a flat surface and level it with a brush or spatula.
4. Creating the Effect: To achieve metallic effects, you can add thin layers of colored resin, alternating colors and creating shades.
5. Drying and Finishing: Let the resin dry following the recommended curing times and, if necessary, apply a clear protective coating for a glossy and durable finish. By following these steps, you can easily create metallic effects with resin for your creative DIY projects.

Experts recommend applying metallic pigments to silicone prints to achieve a luminous and brilliant effect. Before starting, make sure to have high-quality metallic pigments specifically designed for use on silicone. Here are some practical tips for application:

• Thoroughly mix the metallic pigments with transparent liquid silicone.
• Apply the resulting mixture to the silicone mold, distributing it evenly.
• Allow the silicone with metallic pigments to dry completely.
• Once hardened, carefully remove the artifact from the mold. By following these simple steps, you can create silicone prints with a unique metallic effect that is visually striking.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85