How to Mix Epoxy Resin and Hardener

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

How to Mix Epoxy Resin and Hardener

Mixing epoxy resin and hardener is crucial to achieve optimal results in epoxy resin projects. Here is how to proceed correctly:

1. Measurement: Make sure to accurately measure the recommended proportions of epoxy resin and hardener.
2. Pouring: Pour the necessary amount of resin into a clean container.
3. Addition: Add the hardener to the resin in the container.
4. Mixing: Use a wooden stick or a low-speed mixer to thoroughly mix the two components. Mix for at least 2-3 minutes, making sure to scrape the sides and bottom of the container well.
5. Air bubbles: Avoid incorporating too much air during the mixing process. By carefully following these steps, you will achieve a homogeneous mixture ready to be used in your resin projects.

Epoxy Resin Mixing

Mixing epoxy resin is a crucial step to achieve optimal results in DIY projects. To ensure effective mixing, it is important to carefully follow the manufacturer's instructions on the correct ratio between epoxy resin and hardener. Make sure to use clean containers and mix vigorously for at least 2-3 minutes, paying particular attention to the container's corners. Avoid incorporating air during mixing to prevent air bubbles in the compound. Once the mixing is complete, you can proceed with applying the epoxy resin to your project to achieve professional-quality results.

**Epoxy Resin Mixing Techniques**

Mixing epoxy resin requires precision and attention to achieve optimal results. Here are some recommended techniques:

1. Accurate Measuring: Use a scale to accurately weigh the resin and hardener following the proportions recommended by the manufacturer.
2. Slow Mixing: Pour the hardener into the resin and mix slowly for at least 2-3 minutes. Avoid incorporating air into the mixture.
3. Scrape the Sides and Bottom: Make sure to scrape the sides and bottom of the container thoroughly during mixing for even distribution.
4. Avoid Air Bubbles: To prevent air bubble formation, you can use a degassing chamber or gently pass a gas torch over the mixture. By following these techniques, you will be able to effectively mix epoxy resin for your DIY projects.

**Epoxy resin mixing instructions**

To properly mix epoxy resin, carefully follow these instructions:

1. Wear gloves and eye protection.
2. Place the containers of epoxy resin and hardener on a flat, clean surface.
3. Pour the correct amount of epoxy resin into a container.
4. Add the appropriate amount of hardener according to the manufacturer's recommended ratios (usually 2:1 or 1:1).
5. Mix vigorously with a wooden stick for at least 2-3 minutes, scraping the sides and bottom of the container well.
6. Ensure the mixture is homogeneous and free of streaks.
7. Use the resin within the indicated working time and pour carefully to avoid air bubbles. By following these instructions, you will achieve effective and high-quality mixing of epoxy resin.

**Rules for Mixing Epoxy Resin**

Mixing epoxy resin is a critical step to achieve optimal results in your DIY projects. Here are some rules to follow for proper mixing:

1. Respect the proportions: accurately measure the amount of epoxy resin and hardener following the manufacturer's instructions.
2. Use clean, non-porous containers to avoid contamination.
3. Mix slowly and thoroughly for at least 2-3 minutes, scraping the sides and bottom of the container well.
4. Avoid incorporating air during mixing to prevent the formation of air bubbles in the mixture. By following these rules, you can achieve professional results in your epoxy resin projects.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85