Mixing epoxy resin correctly

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Mixing epoxy resin correctly

Mixing epoxy resin correctly is essential to achieve optimal results in DIY projects. Here are some steps to follow:

1. Wear gloves and eye protection.
2. Pour the resin and the hardener accurately according to the recommended ratios.
3. Stir slowly for at least two minutes, scraping the sides and bottom of the container well.
4. Avoid incorporating too many air bubbles during mixing.
5. Apply the resin within the specified working time and allow it to dry completely. Carefully following the manufacturer's instructions ensures proper mixing and a high-quality final result.

Mixing epoxy resin

Mixing epoxy resin is a fundamental process to achieve optimal results in DIY projects and coating applications. To ensure a uniform mixing and proper catalysis, it is important to carefully follow the manufacturer's instructions on the ratio between epoxy resin and hardener. It is recommended to use clean containers and mix slowly to avoid the incorporation of air bubbles. Pigments or colorants can be added during mixing to customize the final result. After thoroughly mixing the two components, it is advisable to pour the resin within the specified working time and let it dry and cure completely according to the manufacturer's instructions.

Epoxy Resin Working Time

The working time of epoxy resin depends on various factors such as room temperature, the quantity of epoxy resin and hardener used, as well as the type of project. In general, it is recommended to thoroughly mix the resin and hardener for at least 2-3 minutes to ensure a homogeneous blend. Subsequently, the working time depends on the viscosity of the resin and the complexity of the project. Typically, there is a working time of about 20-30 minutes at a temperature of 25°C, but it is important to refer to the manufacturer's guidelines for optimal results.

**Techniques for Mixing Epoxy Resin**

Mixing epoxy resin is a crucial step to achieve optimal results in DIY projects. Here are some techniques to follow:

1. Measure epoxy resin and hardener accurately according to the recommended proportions.
2. Use clean and transparent containers to facilitate measurement and mixing.
3. Stir slowly and thoroughly for at least 2-3 minutes, scraping the sides and bottom of the container.
4. Avoid incorporating air during mixing to prevent bubble formation.
5. Allow the mixture to rest for a few minutes before use to allow any air bubbles to escape.

Tips for mixing epoxy resin

Mixing epoxy resin is a crucial step to achieve optimal results in your DIY projects. Here are some useful tips:

• Make sure to carefully follow the manufacturer's instructions on the resin-hardener ratio to avoid curing issues.
• Use clean containers and mix thoroughly for at least 2-3 minutes, scraping the sides and bottom well to ensure a homogeneous mixture.
• Avoid mixing too much resin at once to prevent overheating and trapped air formation.
• Allow the mixture to rest for a few minutes before use to allow air bubbles to escape.
• If needed, you can use a flow enhancer to improve the fluidity and finish of the cured resin.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85