Roof treatment with roller

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Roof treatment with roller

Roof treatment with a roller is an effective method for applying epoxy resins or protective coatings to the building's roof. This technique allows for a uniform distribution of the material on the surfaces, ensuring complete coverage and enhanced durability over time. Before proceeding with the treatment, it is essential to clean and properly prepare the roof surface to ensure optimal adhesion of the coating. The roller is a practical and versatile tool that enables precise and controlled application of the product on the roof, making the job easier even for DIY projects.

How to treat a roof with epoxy resin

Treating a roof with epoxy resin is an excellent solution to ensure long-term waterproofing and protection. Here's how to proceed:

1. Cleaning: Make sure the roof is free from dirt, dust, and debris. Use water and specific detergent if necessary.
2. Resin preparation: Follow the manufacturer's instructions carefully to prepare the epoxy resin correctly.
3. Application: Spread the resin evenly on the roof using a brush or roller, ensuring full coverage of the surface.
4. Drying: Allow the resin to dry for the time indicated by the manufacturer, avoiding direct sunlight exposure during the process.
5. Inspection and maintenance: Regularly check the condition of the coating and apply any touch-ups or additional layers as needed. By following these steps, you can achieve a protected and durable roof over time.

Guide to waterproofing the roof DIY

To waterproof the roof DIY, it is important to carefully follow these steps:

1. Cleaning: Remove debris, dirt, and residues from the roof.
2. Repairs: Check and fix any cracks or damages on the surface.
3. Primer: Apply a specific primer for the type of roof evenly.
4. Waterproofing membrane: Spread a layer of liquid or bituminous membrane on the roof.
5. Sealing: Seal joints and corners with appropriate waterproof sealant.
6. Protection: Add a protective layer to increase the coating's durability.
7. Maintenance: Regularly check the roof's condition and promptly intervene in case of damages. By following these steps carefully, it is possible to waterproof the roof effectively and durably.

Tutorial on How to Protect the Roof with Resin Pigments

Protecting the roof with resin pigments is a fundamental operation to ensure greater durability and resistance to the covering. Here is a brief tutorial on how to proceed:

1. Cleaning: Make sure the roof is free from dust, dirt, and debris.
2. Resin Application: Spread the resin evenly on the roof using a brush or roller.
3. Adding Pigments: Mix the resin pigments into the resin following the recommended doses to achieve the desired color.
4. Coating Application: Once mixed, apply the colored compound on the roof surface in uniform layers.
5. Drying: Allow the coating to dry completely according to the manufacturer's instructions. By carefully following these steps, you can effectively protect your roof with resin pigments.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85