Applying wood filler with a spatula

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Applying wood filler with a spatula

To apply wood filler with a spatula, follow these steps:

1. Prepare the surface: make sure the wood is clean, dry, and free of old filler or paint residues.
2. Prepare the wood filler: mix the filler until it reaches a smooth and homogeneous consistency.
3. Apply the wood filler: take a small amount of filler with the spatula and spread it over the crack or imperfection in the wood. Try to level the surface well.
4. Remove the excess: run the spatula over the surface to remove any excess filler and achieve a smooth finish.
5. Let it dry: respect the drying times indicated on the product before sanding and finishing the job. By following these instructions, you can achieve an effective and well-finished repair on wood.

How to DIY Wood Filler

To DIY wood filler, follow these steps. Firstly, make sure to thoroughly clean the surface to be treated. Then, prepare a filler paste by mixing wood powder with vinyl glue until a homogeneous consistency is obtained. Apply the compound on the cracks or holes to be filled, leveling it with a spatula. Let it dry completely and, if needed, lightly sand it to smooth the surface. Finally, you can proceed with the desired finish, such as varnishing or polishing. Remember to always follow the specific product instructions and work in a well-ventilated area.

Wood Stucco Techniques for Hobbyists

Wood stucco techniques in the DIY hobby world are diverse and allow for achieving professional results. To start, it is essential to prepare the wood surface by sanding it carefully and cleaning it from any residues. Subsequently, the stucco can be applied to fill in any imperfections, such as scratches or holes. After the application, it is advisable to sand delicately again to even out the surface. Finally, one can proceed with the finishing, using varnishes or coatings to protect and enhance the wood. The techniques vary depending on the type of wood and the desired result, offering the possibility to customize and enhance every hobby project.

Using epoxy resin for wood filler

Epoxy resin is ideal for filling wood due to its ability to adhere durably and resistantly. To properly use it for wood filling, follow these steps:

1. Prepare the epoxy resin carefully following the manufacturer's instructions.
2. Clean and dry the wood surface to be filled thoroughly.
3. Apply the resin on cracks or imperfections using a specific spatula.
4. Level and shape the compound to achieve a uniform surface.
5. Let it dry completely following the indicated times.
6. Optionally, sand the surface to make it smooth. With these simple steps, you can effectively and durably fill wood using epoxy resin.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85