Correcting irregular resin casts

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Correcting irregular resin casts

To correct irregular resin casts, it is important to carefully follow a few steps. First of all, it is advisable to sand the surface with fine-grit sandpaper to even out imperfections. Subsequently, the irregular areas can be filled with a clear epoxy resin, leveling it carefully. Once dry, a new sanding can be done to ensure a smooth and even finish. Finally, for an optimal result, it is recommended to apply a transparent protective coating to protect the surface and give it a shiny and durable appearance over time.

How to achieve smooth surfaces with epoxy resin

To achieve smooth surfaces with epoxy resin, it is essential to follow some key steps. First of all, make sure to prepare the surface carefully by removing any impurities and sanding it with fine sandpaper. Next, apply a thin layer of epoxy resin, spreading it evenly with a brush or a spatula. To prevent air bubbles, you can use a gas torch to lightly heat the resin and bring them to the surface. Finally, allow the resin to dry and cure completely following the recommended catalysis times by the manufacturer. Remember that care and precision are crucial to obtain a smooth and flawless surface with epoxy resin.

**Techniques for Finishing Epoxy Resin Castings**

To achieve high-quality results when finishing epoxy resin castings, various techniques can be followed. Here are some useful tips:

• Carefully sand the resin surface with fine sandpaper to remove any imperfections and achieve a smooth finish.
• Apply a specific resin primer to promote adhesion of the subsequent finishing layer.
• Use transparent or pigmented resins to create chromatic or translucent effects.
• Add thin layers of resin to create three-dimensional effects or incorporate inclusions such as dried flowers or glitter to personalize the casting.
• Lastly, seal the work with a clear protective coating to ensure long-lasting durability and scratch resistance.

Correcting imperfections in epoxy projects

Correcting imperfections in projects made with epoxy resin may be necessary to achieve optimal results. Here are some steps to follow to correct any defects:

• Gently sand the affected area with fine sandpaper to eliminate any irregularities.
• Thoroughly clean the surface to remove dust and residues.
• Prepare a new resin mixture, making sure to correctly follow the manufacturer's instructions.
• Pour the resin accurately into the area to be corrected, being careful to avoid air bubbles.
• Use a hairdryer or heat gun to eliminate any air bubbles present.
• Allow the resin to cure for the necessary time. By following these steps, it will be possible to successfully correct imperfections in projects made with epoxy resin.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85