Correcting pours with uneven thickness

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Correcting pours with uneven thickness

To correct pours with uneven thickness, it is essential to follow some precise steps to achieve an optimal result:

1. Cleaning: Remove any residues and dirt from the surface to be corrected.
2. Leveling: Apply a specific leveling resin to correct irregularities and ensure a uniform base.
3. Filling: Use an epoxy filler to fill any holes or cracks on the surface.
4. Sanding: Carefully sand the treated area to obtain a smooth and uniform surface.
5. Protection: Apply a protective coating to ensure resistance and durability over time. By carefully following these steps, it is possible to effectively correct pours with uneven thickness.

Correcting irregular pours

To correct irregular pours on resin or silicone surfaces, it is important to carefully follow these steps:

1. Sand the affected area with fine-grit sandpaper to level the surface.
2. Thoroughly clean the area to remove dust and dirt.
3. Prepare a new mixture of resin or silicone, following the manufacturer's instructions carefully.
4. Precisely apply the new mixture to the irregular area, leveling it with a spatula or trowel.
5. Allow it to dry completely following the recommended curing times.
6. If necessary, lightly sand the surface to make it smooth and even. By following these steps carefully, it will be possible to effectively correct irregular pours and restore the uniform appearance of the surface.

Leveling resin surfaces

Leveling resin surfaces is a fundamental process to achieve optimal results in coating projects. First of all, make sure the surface is clean and free from dust and grease. Apply a specific resin primer to ensure perfect adhesion. Then, pour the resin evenly on the surface and distribute it with a roller to avoid air bubbles. Use a notched trowel to level the resin evenly. Finally, let it dry according to the manufacturer's instructions. This process will ensure a smooth and uniform surface, ready for further finishes.

Techniques for correcting irregular prints

To correct irregular prints, it is possible to adopt several effective techniques:

• Check and adjust the printer temperature to avoid smudges and imperfections.
• Properly calibrate the printing platform to ensure uniform material adhesion.
• Regularly clean the print head to prevent clogs and defects in print quality.
• Use high-quality resins or printing materials to achieve more precise and uniform results.
• Verify the slicing settings in the 3D printing software to ensure they are optimized for the model and material used. By following these practices, it is possible to improve print quality and successfully correct any irregularities.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85