Improving casting on large molds

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Improving casting on large molds

To improve casting on large molds, it is advisable to use low viscosity epoxy resins. These resins allow for better penetration into the details of the molds, while reducing the formation of air bubbles. Additionally, the use of silicone additives can help improve the resin's fluidity and prevent the formation of air traps during casting. Make sure to carefully follow the manufacturer's instructions for mixing and applying the resins, and consider using release agents to facilitate the demolding of the artifact once it has hardened.

**Techniques for Casting on Large Molds**

To effectively carry out castings on large molds, it is advisable to follow some specific techniques:

1. Use low viscosity epoxy or polyurethane resins to ensure a uniform distribution of the material.
2. Make sure that the molds are perfectly clean and dry before proceeding with the casting.
3. Use release agents to facilitate the extraction of the artifact once it has hardened.
4. Consider the working and curing time of the resin to avoid deformations or defects.
5. Pay particular attention to the accurate mixing of the components to ensure correct polymerization.
6. Evaluate the use of internal supports or reinforcements to support the structure during casting and curing.

How to achieve a perfect casting on large molds

To achieve a perfect casting on large molds, it is essential to carefully follow these steps:

1. Preparation: Make sure the mold is clean and well leveled.
2. Resin selection: Choose a resin suitable for the size of the mold and the type of object to be created.
3. Mixing: Follow the manufacturer's instructions carefully for mixing the resin and adding colors or additives.
4. Pouring: Pour the resin slowly and evenly into the mold, avoiding air bubbles.
5. Leveling and curing: Level the surface of the resin and let it cure at the right temperature and humidity. By following these steps, you will achieve a perfect casting even on large molds.

Tips for flawless casts on large molds

To achieve flawless casts on large molds, follow these helpful tips:

• Make sure the mold is clean and dry before starting the casting.
• Use high-quality resins suitable for the size of the mold.
• Thoroughly mix the resin following the manufacturer's instructions to prevent air bubbles.
• Pour the resin slowly and evenly into the mold to avoid build-ups and air bubbles.
• Use a vacuum chamber to remove any air bubbles present in the resin.
• Cover the mold with a lid or film to prevent dust during the drying process.
• Follow the curing times and specific instructions of the resin used carefully to achieve optimal results.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85