Improving casting on rectangular surfaces

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Improving casting on rectangular surfaces

To enhance casting on rectangular surfaces, it is advisable to use self-leveling epoxy resins. These resins are designed to ensure a uniform distribution without air bubbles, making them ideal for rectangular surfaces. Before application, make sure the surface is clean, dry, and free from impurities. Apply the resin following the manufacturer's instructions and use a roller to ensure even coverage. Allow it to dry completely according to the recommended curing times. This method will ensure a uniform and high-quality casting on rectangular surfaces, optimizing the final result of your project.

Casting Techniques for Flat Surfaces

Casting techniques for flat surfaces are essential in the field of epoxy resins and coatings. To achieve optimal results, it is advisable to follow some key steps:

1. Surface preparation: ensure it is clean, dry, and free from impurities.
2. Accurate mixing: properly mix the resin with the hardener following the recommended ratios.
3. Uniform pouring: distribute the mixture on the surface evenly.
4. Leveling: use a spatula to level the resin and remove any air bubbles.
5. Drying: allow the coating to dry at the right temperature and humidity. By following these techniques, it is possible to obtain flat and smooth surfaces with a professional result.

Improving the finish of rectangular castings

To enhance the finish of rectangular castings, it is advisable to follow some steps. First of all, make sure to use high-quality resins specifically designed for castings, in order to achieve a smooth and uniform surface. To reduce air bubbles, it is important to thoroughly mix the resin and use a deaerator if necessary. For an even smoother finish, you can apply a thin layer of liquid silicone on the surface before the resin completely hardens. Lastly, to eliminate any imperfections or scratches, you can gently sand the surface with fine sandpaper and then polish it with a specific polishing compound.

Tips for achieving perfect casts on rectangular surfaces

To achieve perfect casts on rectangular surfaces, it is essential to follow some practical tips:

1. Cleaning: make sure the surface is clean, dry, and free from dust or grease.
2. Leveling: use a leveling compound to ensure a smooth and even surface.
3. Masking: protect the edges of the surface with adhesive tape to prevent resin or silicone leakage.
4. Mixing: carefully follow the product mixing instructions to achieve a homogeneous consistency.
5. Application: pour the resin or silicone onto the surface evenly and without interruptions.
6. Final leveling: use a spatula to level the cast and remove any air bubbles.
7. Drying: allow the material to dry at the right temperature and for the indicated time. By following these steps, you will achieve perfect casts on rectangular surfaces.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85