Improving performance on wide castings

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Improving performance on wide castings

To enhance performance on wide castings, it is advisable to consider some strategies:

• Use high-performance epoxy resins, capable of covering large surfaces evenly.
• Add fluidizing additives to the resins to facilitate their distribution over extended areas.
• Apply a specific primer to increase the adhesion of the resin to the substrate and enhance its durability over time.
• Use notched trowels to evenly spread the resin on the surface.
• Pay attention to temperature and humidity during application to avoid drying defects.
• Consider using silicones to seal any joints and ensure a homogeneous and durable finish.

Techniques for casting resin on large surfaces

The techniques for casting resin on large surfaces require precision and attention to detail. Here are some fundamental steps to follow:

• Prepare the surface: make sure it is clean, smooth, and free from dust or grease.
• Measure and mix the epoxy resin carefully, following the manufacturer's instructions.
• Pour the resin onto the surface evenly and avoid the formation of air bubbles.
• Use a brush or spatula to distribute the resin evenly.
• Cover the surface to protect it from dust during the drying process.
• Allow the resin to cure for the necessary time, avoiding any movements or vibrations that could compromise the final result. By following these guidelines, you can achieve high-quality resin casts on large surfaces.

Tips for achieving a perfect finish in large resin casts

To achieve a perfect finish in large resin casts, follow these tips:

• Use high-quality resins designed for large casts.
• Ensure you have a clean and well-leveled surface before starting the cast.
• Thoroughly mix the resin to avoid air bubbles and ensure even distribution.
• Constantly monitor the room temperature and resin temperature during the casting process.
• Apply a thin layer of resin as a primer before the main cast to improve adhesion and prevent any imperfections.
• Use high-quality mixing and application equipment to achieve optimal results. By following these tips, you can achieve a perfect finish in your large resin casts.

How to maximize the visual effect of castings on large surfaces

To maximize the visual effect of castings on large surfaces, it is advisable to follow some key steps:

1. Resin selection: Use a high-quality transparent resin to achieve a crystalline and luminous effect.
2. Surface preparation: Ensure that the surface is clean, smooth, and free from dust or impurities that could compromise the final appearance.
3. Measuring and mixing: Follow the manufacturer's instructions carefully to correctly measure the resin and hardener, avoiding air bubbles in the mixture.
4. Uniform application: Pour the resin onto the surface evenly and level carefully to avoid irregularities.
5. UV protection: Use a resin with UV protection to prevent yellowing and maintain transparency over time. By following these tips, you will achieve an optimal visual effect on large surfaces with resin castings.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85