Improving resin castings on large molds

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Improving resin castings on large molds

To improve resin castings on large molds, it is advisable to follow some precautions:

1. Ensure that the mold is perfectly clean and free from dust or grease residues.
2. Use high-quality resins suitable for the dimensions of the mold.
3. Add viscosity correctors or flow agents to facilitate the even distribution of the resin.
4. Consider the use of release agents to ease the demolding of the artifact from the mold.
5. Optimize the curing and polymerization times according to the dimensions and complexity of the mold.
6. Verify the correct pouring pressure and eliminate any air bubbles. By following these guidelines, it will be possible to achieve high-quality resin castings on large molds.

Resin Casting Techniques for Large Molds

The techniques for carrying out resin casting on large molds require attention and precision. Here are some steps to follow to achieve optimal results:

1. Mold Preparation: Ensure that the mold is clean, dry, and leveled.
2. Calculation of Resin Quantity: Calculate accurately the amount of resin needed to fill the mold without waste.
3. Thorough Mixing: Mix the epoxy or polyurethane resin following the manufacturer's instructions to avoid air bubbles.
4. Pouring the Resin: Pour the resin into the central area of the mold evenly and without creating turbulence.
5. Leveling and Settling: Level the resin and settle it inside the mold to avoid irregularities.
6. Waiting and Curing: Allow the resin to settle and cure for the necessary time before removing it from the mold. By following these techniques, you will be able to successfully carry out resin casting on large molds.

Improvements for resin casting on large molds

To achieve improvements in resin casting on large molds, it is advisable to follow some specific guidelines:

1. Ensure that the resin material is properly dosed to avoid waste and ensure correct solidification.
2. Use high viscosity resins to reduce the risk of excessively fluid casts that could leak out of the mold.
3. Verify that the mold is perfectly clean and leveled to avoid deformations or irregularities on the surface of the artifact.
4. When dealing with large molds, it is recommended to use internal supports or reinforcements to ensure a uniform distribution of the resin and prevent deformations during the hardening process.
5. Finally, carefully follow the manufacturer's instructions for the resin and coating to achieve optimal results.

Tips for pouring resin into larger molds

Pouring resin into larger molds requires attention and precision to achieve optimal results. Here are some helpful tips:

• Make sure the mold is clean and completely dry before starting the process.
• Use an epoxy or polyurethane resin suitable for the project's dimensions and your needs.
• Thoroughly mix the resin with the catalyst, following the proportions recommended by the manufacturer.
• Pour the resin slowly into the mold to avoid air bubbles and ensure that all corners are uniformly filled.
• If necessary, use a brush or a similar tool to evenly distribute the resin.
• Cover the mold with a lid or a transparent sheet to prevent dust and ensure a smooth surface.
• Follow the recommended drying and curing times carefully before removing the piece from the mold. By following these tips, you can achieve professional results when pouring resin into larger molds.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85