Improving resin distribution on the edges

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Improving resin distribution on the edges

To improve resin distribution on the edges, it is essential to carefully follow these steps:

1. Surface preparation: Make sure the edges are clean, dry, and free from dust or grease residues.
2. Uniform resin application: Use a brush or a roller to evenly distribute the resin on the edges, avoiding build-ups or neglected areas.
3. Leveling: Ensure to carefully level the resin on the edges to prevent irregularities or air bubbles.
4. Drying time: Adhere to the recommended drying times to ensure a homogeneous and durable resin distribution. By following these guidelines, you will achieve an optimal distribution of resin on the edges of your project.

Technique for evenly distributing resin

To evenly distribute resin, it is important to follow a precise technique:

1. Prepare the resin and catalyst according to the manufacturer's instructions.
2. Use a clean container and carefully mix the two components for at least 2-3 minutes.
3. Pour the resin onto the substrate consistently and evenly, avoiding build-ups or empty areas.
4. Use a brush or spatula to evenly distribute the resin across the entire surface.
5. Make sure to remove any air bubbles with a vacuum roller or a gas torch.
6. Allow the resin to cure under the optimal temperature and humidity conditions specified by the manufacturer. By following these steps, you will achieve an even distribution of resin on your project.

Tips for achieving a uniform distribution of epoxy resin

To achieve a uniform distribution of epoxy resin, follow these practical tips:

• Make sure to thoroughly mix the resin following the manufacturer's instructions to avoid lumps or uncatalyzed areas.
• Use tools such as spatulas or mixers to ensure a thorough blending.
• Pour the resin into a clean mold and level the surface carefully to prevent accumulations or unevenness.
• Avoid drafts or extreme temperatures during the polymerization process for consistent catalysis.
• If necessary, use finishing tools such as sanders or polishers to further smooth out the surface.

Improving the application of epoxy resin on edges

To enhance the application of epoxy resin on edges, it is essential to follow some crucial steps:

1. Thorough cleaning: Ensure that the edges are perfectly clean and free from dust or residues.
2. Primer application: Use a specific primer to ensure optimal adhesion of the resin to the edges.
3. Controlled application: Apply the resin carefully on the edges, avoiding excess that could compromise the final result.
4. Leveling: Make sure to level the resin on the edges uniformly to achieve a smooth and homogeneous finish. By following these tips, it will be possible to significantly improve the application of epoxy resin on edges in a professional and long-lasting manner.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85