Improving the Casting Performance on Decorative Panels

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Improving the Casting Performance on Decorative Panels

To enhance the casting performance on decorative panels, it is advisable to follow some specific practices:

1. Surface Preparation: Ensure that the panel is clean, dry, and free from residues or impurities that could compromise the adhesion of the resin.
2. Use of High-Quality Resins: Choose clear, high-quality resins, ideal for achieving a smooth and glossy surface on decorative panels.
3. Precise Dosage: Carefully follow the manufacturer's instructions to accurately dose the resin and hardener, ensuring uniform polymerization.
4. Controlled Environment Processing: Avoid dust, humidity, and drafts during casting and drying to achieve an optimal result. By following these recommendations, a better casting performance on decorative panels can be achieved.

Improving epoxy resin finish

To improve the finish of epoxy resin, follow these practical tips:

• Make sure the surface is clean and free of dust before application.
• Use a specific primer for epoxy resins to ensure optimal adhesion.
• Apply the resin layer evenly to avoid irregularities.
• Remove air bubbles with a gas torch or a deaerator.
• Cover the work with a scratch-resistant protective coating to preserve its appearance over time.
• If necessary, you can lightly sand the surface to make it even smoother and shinier. By following these steps, you will achieve a flawless finish on your epoxy resin.

Pouring techniques on decorative panels

Pouring techniques on decorative panels are essential to achieve high-quality results. Here are some steps to follow for a perfect pour:

• Prepare the epoxy resin following the manufacturer's instructions carefully.
• Apply a thin layer of resin on the surface of the panel to promote adhesion.
• Pour the resin over the panel evenly, avoiding air bubbles.
• Use a spatula to distribute the resin evenly.
• Add pigments or colorants to create decorative effects.
• Allow the resin to dry following the recommended curing times. By following these techniques, you can create unique and visually impactful decorative panels.

How to Achieve a Glossy Effect on Epoxy Resin

To achieve a glossy effect on epoxy resin, it is important to follow some key steps:

1. Surface Preparation: Ensure that the surface where the resin will be poured is clean, smooth, and free from dust or other impurities.
2. Use of Transparent Resin: Choose a high-quality transparent resin, ideal for creating a glossy and crystalline effect.
3. Uniform Application: Pour the resin onto the surface evenly, avoiding the formation of air bubbles.
4. Leveling and Protection: Carefully level the resin on the surface and let it dry following the manufacturer's instructions. For a long-lasting glossy effect, consider applying a transparent protective coating. By carefully following these steps, you can achieve a beautiful glossy effect on the epoxy resin.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85