Improving the distribution of NatureResin in molds

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Improving the distribution of NatureResin in molds

To improve the distribution of NatureResin in molds, it is advisable to follow some fundamental steps:

• Ensure that the resin is thoroughly mixed without creating air bubbles.
• Use an applicator to pour the resin into the desired points of the mold evenly.
• Use a tool to spread the resin evenly over the entire surface of the mold.
• Gently vibrate the mold to eliminate any air bubbles trapped in the resin.
• If necessary, use a brush to distribute the resin in the smaller details of the mold. By following these guidelines, it will be possible to achieve uniform distribution of NatureResin in molds, ensuring high-quality results.

Improving the Distribution of Epoxy Resin

To improve the distribution of epoxy resin, it is advisable to carefully follow these steps:

• Ensure that the surfaces are clean, dry, and free of grease to promote resin adhesion.
• Use a brush or roller to evenly spread the resin on the surface, avoiding buildup and bulges.
• Thoroughly mix the epoxy resin with the catalyst according to the recommended ratios to ensure proper polymerization.
• Work in a well-ventilated environment to avoid air bubbles in the resin.
• Optionally, use a specific primer to enhance resin adhesion on certain surfaces. By following these guidelines, you will achieve a uniform and high-quality distribution of epoxy resin.

Techniques for distributing resin in molds

To distribute resin evenly and precisely in molds, various techniques can be used. Here are some common methods used in the epoxy and polyurethane resin industry:

• Direct pouring: Pouring the resin directly into the molds, ensuring it is distributed evenly.
• Use of spatulas: Using spatulas to spread and distribute the resin in various points of the mold.
• Use of dispensing guns: Using dispensing guns to accurately dispense the resin and direct it to the desired points.
• Vacuum techniques: Applying vacuum techniques to remove air bubbles and distribute the resin evenly. These techniques help achieve quality results in the production of resin artifacts.

Tips for achieving a uniform distribution of epoxy resin

To achieve a uniform distribution of epoxy resin, it is important to follow some practical tips:

1. Thoroughly mix: Make sure to thoroughly mix the resin with the hardener following the manufacturer's instructions.
2. Use proper tools: Use spatulas or specific mixers to ensure a homogeneous blending.
3. Apply evenly: Distribute the resin evenly on the surface, avoiding build-ups or empty areas.
4. Level carefully: Use spatulas or rollers to level the resin evenly across the entire surface. By following these tips, you can achieve a uniform distribution of epoxy resin for a high-quality final result.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85