Improving the performance of professional castings

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Improving the performance of professional castings

To improve the performance of professional castings, it is essential to follow some technical precautions:

1. Use high-quality resins suitable for the type of project.
2. Precisely measure the components to avoid errors in catalysis.
3. Thoroughly mix the resin with the catalyst for uniform distribution.
4. Remove air bubbles by using a vacuum chamber or a degassing method.
5. Monitor the temperature and humidity of the working environment to prevent casting defects.
6. Apply any protective coatings or finishes to enhance the appearance and long-term durability of the castings. By following these practices, professional and high-quality results will be achieved.

Advanced Techniques for Professional Castings

Advanced techniques for professional castings require skill and precision. To achieve high-quality results, it is essential to follow these steps:

• Preparation of the work area: ensure that the surface is clean and level.
• Selection of appropriate resins and catalysts: choose high-quality products that are compatible with each other.
• Precise measurement: carefully follow the recommended proportions to avoid errors in the chemical reaction.
• Thorough mixing: to ensure an even distribution of the components.
• Use of quality molds: ensure they are suitable for the type of resin being used.
• Control of air bubbles: apply techniques such as vacuum degassing to eliminate bubbles during the casting process.
• Hardening time: adhere to processing and drying times to avoid defects. By following these practices, high-quality and long-lasting professional castings can be achieved.

Optimizing resin for professional casting

To optimize resin for professional casting, it is essential to follow some key steps:

1. Resin selection: choose a high-quality epoxy or polyurethane resin suitable for professional castings.
2. Precise proportions: accurately measure the amounts of resin and hardener to achieve a homogeneous and stable mixture.
3. Removing air bubbles: use a vacuum device to eliminate air bubbles from the resin before casting.
4. Temperature control: maintain the resin and the surrounding environment at the recommended temperature to avoid casting defects.
5. Finishing and polishing: after casting, perform proper finishing and polishing to achieve a professional and high-quality result.

Tips for Perfect Results in Professional Castings

For perfect results in professional castings, it is essential to follow some useful tips:

• Use high-quality resins to ensure strength and durability.
• Thoroughly mix resins and catalysts to avoid air bubbles.
• Pay attention to the temperature and humidity of the environment during casting.
• Use clean and well-lubricated molds to facilitate the release of the artifact.
• Carefully follow the manufacturer's instructions for dosages and curing times.
• If necessary, use release agents to ease the extraction of the artifact from the mold.
• Allow the artifact to dry and cure completely before proceeding with any finishes. By following these tips, you will achieve perfect results in your professional castings.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85