Improving the Quality of Decorative Resin Works

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Improving the Quality of Decorative Resin Works

To enhance the quality of decorative resin works, it is essential to follow some precautions:

1. Use high-quality resins to ensure a durable and resistant final result.
2. Make sure to thoroughly prepare the surface where the resin will be applied, removing any residues and ensuring optimal adhesion.
3. Follow the manufacturer's instructions meticulously during the resin mixing and application process.
4. Pay attention to the correct temperature and ambient humidity during the working process.
5. Consider using pigments and additives to customize and enhance the aesthetics of the final work.
6. Lastly, protect the resin coating with a suitable sealant to ensure its long-lasting durability.

Techniques to achieve perfect finishes in epoxy resin

To achieve perfect finishes in epoxy resin, it is important to follow some specific techniques:

• Surface preparation: make sure the surface is clean, dry, and smooth before applying the resin.
• Accurate mixing: carefully follow the manufacturer's instructions to mix the resin and hardener in the right proportion.
• Uniform application: spread the resin evenly on the surface to avoid air bubbles or irregularities.
• Use of a torch to eliminate bubbles: pass a torch or a lighter over the resin to eliminate air bubbles and achieve a more uniform finish.
• Drying time: respect the recommended drying times before applying any subsequent layers or protective finishes. By following these techniques, it is possible to achieve perfect finishes in epoxy resin with a professional and long-lasting result.

Improving the strength and shine of epoxy resins

To enhance the strength and shine of epoxy resins, it is advisable to follow some key steps:

1. Surface preparation: Ensure that the surface is clean, dry, and free from grease or dirt.
2. Uniform application: Spread the resin evenly to avoid air bubbles or irregularities in the finish.
3. Use of suitable catalysts: Follow the manufacturer's instructions carefully for the correct dosage of the catalyst to ensure optimal polymerization.
4. UV protection: To prevent yellowing or deterioration, use resins with UV additives or apply a transparent protective coating. By carefully following these guidelines, you can achieve a durable and glossy surface with epoxy resins.

Tips for creating high-quality resin artworks

To create high-quality resin artworks, follow these tips:

• Use high-quality epoxy resins to ensure a transparent and durable finish
• Measure the proportions between resin and hardener accurately to avoid polymerization issues
• Eliminate air bubbles with a torch or stirrer for a smooth and uniform surface
• Protect the artwork from yellowing with UV-stable resins or transparent coatings
• Experiment with pigments, dyes, or inserts to create unique effects
• Follow the manufacturer's instructions and work in a clean and well-ventilated environment
• Continuously research new techniques and inspirations to enhance your creations.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85