Improving the quality of technical casts

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Improving the quality of technical casts

To improve the quality of technical casts, it is essential to follow some best practices:

• Use high-quality resins suitable for the specific application.
• Precisely measure resin and hardener to ensure correct catalysis.
• Ensure that the surfaces are clean, dry, and adequately prepared before casting.
• Avoid air bubbles in the mixture by carefully mixing and possibly using vacuum degassing.
• Monitor the temperature during casting to prevent shrinkage or excessive heat dissipation.
• Use quality and well-lubricated molds to facilitate the removal of the finished piece.
• Carefully follow the manufacturer's instructions and always test the process on a small scale before final production.

Resin Casting Techniques

Resin casting techniques are essential to achieve quality results in the DIY and crafting sector. Here are some practices to follow:

• Carefully prepare the working surface
• Accurately measure the resin and hardener
• Stir slowly to avoid air bubbles
• Use leak-proof molds to prevent leaks
• Add colors or pigments evenly
• Level the resin for a smooth finish
• Cover to protect from dust during curing
• Respect drying and curing times By following these techniques, impeccable and long-lasting resin casts can be achieved.

How to Achieve Perfect Castings

To achieve perfect castings, it is essential to follow some guidelines:

1. Choose the appropriate epoxy resin for the type of project and desired characteristics.
2. Clean and prepare the surface where the resin will be poured thoroughly.
3. Measure the amount of resin and catalyst accurately following the recommended ratios.
4. Mix gently to avoid the formation of air bubbles.
5. Pour the resin slowly and evenly.
6. Use a torch or a similar tool to eliminate any air bubbles present.
7. Cover the casting during the curing process to protect it from dust and dirt. By carefully following these steps, you can achieve perfect and high-quality castings.

Tips for professional castings

Professional castings require the use of high-quality epoxy resins, ideal for achieving precise and long-lasting results. Here are some useful tips:

• Choose the epoxy resin that best suits your project based on the desired characteristics (transparency, strength, flexibility).
• Make sure to carefully follow the manufacturer's instructions for dosages and curing times.
• Use quality molds to obtain perfect shapes and sharp details.
• Eliminate air bubbles with a vacuum degasser or suitable method.
• Protect the finished work with a clear coating for added durability and brilliance. By following these tips, you can create high-quality professional castings with excellent results.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85