Improving the quality of the finished product

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Improving the quality of the finished product

To improve the quality of the finished product, it is essential to use high-quality epoxy resins and silicone for coatings. Make sure to carefully follow the manufacturer's instructions during application to ensure proper adhesion and long-term durability. Additionally, proper surface preparation is advisable to remove dirt, grease, or old paint before applying the coating. If you are working on a DIY project, ensure to use the appropriate tools and work in a well-ventilated environment to avoid health issues. With attention to detail and proper execution, you can achieve a high-quality and durable finished product.

Techniques to improve the finishing of artifacts

To enhance the finishing of artifacts, various processing techniques can be adopted. Here are some common methods used in the DIY and craftsmanship sector:

• Sanding: using increasingly finer sandpaper to eliminate imperfections and achieve a smooth surface.
• Application of primer: to promote the adhesion of the subsequent coating and ensure a uniform finish.
• Use of special coatings: such as paints, epoxies, or silicones, to provide resistance and aesthetics to the artifact.
• Advanced painting techniques: such as airbrush or spray brush, to achieve special and detailed finishes. These techniques can help obtain artifacts with a professional and well-finished appearance.

How to achieve smooth surfaces with epoxy resin

To achieve smooth surfaces with epoxy resin, it is essential to follow some key steps:

1. Preparation: Make sure the surface is clean, dry, and free of dust or grease.
2. Application: Pour the epoxy resin evenly onto the prepared surface.
3. Leveling: Use a brush or spatula to distribute the resin evenly.
4. Removing air bubbles: Pass a torch or a hot brush over the surface to eliminate air bubbles.
5. Drying: Allow the resin to dry following the manufacturer's instructions.
6. Sanding: If necessary, use fine sandpaper to sand the surface and make it smooth. By carefully following these steps, you can achieve smooth and uniform surfaces with epoxy resin.

Tips for reducing air bubbles in epoxy resin

To reduce air bubbles in epoxy resin, it is important to follow some precautions during the processing. Here are some useful tips:

• Gently stir the resin before use to avoid air incorporation.
• Use a tall and narrow container to mix the resin, in order to reduce bubble formation.
• Avoid overloading the mix with pigments or additives, which can increase the risk of bubbles.
• Use a gas torch or a similar tool to eliminate surface air bubbles.
• Let the resin rest for a few minutes after mixing to allow bubbles to rise to the surface and then carefully remove them. By following these tips, it will be possible to achieve more uniform and defect-free results in resin processing.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85