Improving the reliability of the resin coating process

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Improving the reliability of the resin coating process

To enhance the reliability of the resin coating process, it is essential to follow some best practices:

• Use high-quality resins suitable for the specific application requirements.
• Ensure to correctly follow the manufacturer's instructions for resin preparation and application.
• Make sure the surface to be coated with resin is clean, dry, and well-prepared to promote optimal adhesion.
• Consider the use of primers or adhesion promoters to enhance compatibility between the resin and the substrate.
• Monitor the temperature and humidity carefully during the resin coating process to prevent defects.
• Conduct quality control tests to verify the effectiveness of the process and make any necessary adjustments. By carefully following these guidelines, the reliability of the resin coating process can be significantly increased.

Techniques for optimizing resin catalysis

To optimize resin catalysis, it is possible to adopt various effective techniques:

• Ensure to accurately follow the proportions between resin and catalyst specified by the manufacturer.
• Thoroughly mix the resin and catalyst to ensure a homogeneous distribution.
• Carefully monitor the temperature during the catalysis process, as it can influence the speed.
• Use catalysts suitable for the environmental conditions and the type of resin being used.
• Avoid the presence of moisture, which could compromise the catalysis process.
• Follow the catalysis times indicated carefully to ensure a complete reaction. By following these techniques, it is possible to achieve optimal results in resin catalysis.

How to Avoid Air Bubbles in Resin Products

To prevent air bubbles in resin products, it is essential to carefully follow some steps during the processing. Here are some useful tips:

1. Deaeration: Use a vacuum to remove air bubbles from the resin before pouring it into the mold.
2. Mixing: Stir the resin slowly to avoid air incorporation and use clean, dry tools.
3. Temperature: Ensure that the ambient temperature and resin temperature are suitable to reduce bubble formation.
4. Mold: Make sure the mold is clean and well-prepared to facilitate the smooth flow of resin. By carefully following these guidelines, it is possible to obtain resin products free from air bubbles.

Solutions to improve the mechanical resistance of epoxy resin

To enhance the mechanical resistance of epoxy resin, several solutions can be adopted:

• Adding fibrous reinforcements such as fiberglass or carbon fiber to increase tensile and flexural strength.
• Using fillers like quartz powders or glass microspheres to enhance wear and impact resistance.
• Incorporating additives to improve adhesion between the resin and other materials.
• Optimizing the polymerization process to ensure greater molecular cohesion.
• Applying surface treatments such as sandblasting to promote mechanical bonding.
• Using high-strength epoxy or polyurethane resins for specific applications. By implementing these solutions, it's possible to achieve resins with higher mechanical resistance and optimized performance.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85