Improving the repeatability of castings

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Improving the repeatability of castings

To improve the repeatability of castings, it is essential to follow some key practices:

1. Use high-quality resins specifically designed for castings to ensure uniformity and stability.
2. Precisely measure the components, carefully following the recommended proportions.
3. Thoroughly mix the resin and the catalyst to ensure a homogeneous blend.
4. Use high-quality and well-prepared molds to achieve consistent results.
5. Monitor and adjust the temperature and humidity of the working environment to prevent fluctuations during the casting process.
6. Test and document each phase of the process to identify any variations and make necessary corrections.

Techniques for achieving precise castings

To achieve precise castings with epoxy resins or silicone, it is essential to follow specific techniques. Here are some helpful tips:

• Use high-quality and well-leveled molds.
• Measure the quantities of resin or silicone accurately, following the proportions recommended by the manufacturer.
• Thoroughly mix the components to avoid air bubbles.
• Pour the material slowly and carefully into the mold.
• Use a spatula to evenly distribute the resin or silicone.
• Eliminate any air bubbles with a gas torch or a degassing agent. By following these techniques, it will be possible to obtain precise and high-quality castings.

Tips for improving the uniformity of castings

To enhance the uniformity of castings, it is crucial to follow some practical tips:

1. Use high-quality resins, specifically designed for castings, to ensure greater uniformity in the process.
2. Carefully monitor the temperature during the preparation and casting of resins to avoid variations that could affect uniformity.
3. Thoroughly mix the resins with the catalysts to ensure a homogeneous distribution of the ingredients.
4. Use high-quality molds and ensure they are clean and well lubricated to facilitate the even distribution of the resin.
5. Avoid air bubbles in the mixture by gently stirring and, if necessary, using a vacuum chamber to eliminate the bubbles.
6. Follow the manufacturer's instructions carefully to ensure the correct mixing and application of the resins. These precautions will help achieve more uniform and high-quality castings.

Improving the Consistency of Epoxy Resin Creations

To enhance the consistency of epoxy resin creations, it is crucial to follow some best practices. Firstly, make sure to accurately measure the amounts of resin and hardeners to avoid imbalances in catalyzation. Always use high-quality resins and carefully follow the manufacturer's instructions. To reduce the formation of air bubbles, it is advisable to mix the resin slowly and let it rest before pouring it into the molds. Additionally, you may consider using an oven to eliminate surface bubbles. Lastly, protect your creations with a clear silicone coating to ensure durability and shine over time.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85