Preventing structural defects in casting

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

preventing structural defects in casting

To prevent structural defects in casting, it is essential to follow some precautions during the processing with epoxy resins or silicone. Here are some useful tips:

• Ensure that the material is thoroughly mixed to avoid air bubbles.
• Use clean and well-lubricated molds for proper piece formation.
• Check the temperature and humidity of the working environment to prevent unwanted reactions.
• Verify that the curing time is respected to ensure uniform solidification.
• Follow the manufacturer's instructions for optimal dosages and processing times. By following these guidelines, it is possible to minimize structural defects in casting with epoxy resins or silicones.

Improving epoxy resin resistance

To enhance the resistance of an epoxy resin, you can follow some practical tips:

• Make sure to thoroughly mix the resin components according to the manufacturer's instructions to ensure a complete chemical reaction.
• Apply the resin on a clean, dry, and well-prepared surface to promote adhesion.
• Use specific primers or adhesion promoters for epoxy resins to enhance compatibility with the substrate.
• Consider adding fillers or reinforcements such as glass fibers or microspheres to increase the mechanical strength of the resin.
• Follow the curing guidelines and drying times to ensure the maximum effectiveness of the epoxy resin.

Techniques to prevent bubbles in epoxy resin

To prevent the formation of bubbles in epoxy resin, it is important to follow specific techniques during the coating application process. Here are some useful tips:

• Make sure to thoroughly mix the two components of the epoxy resin following the proportions recommended by the manufacturer.
• Apply the coating in thin layers to avoid air entrapment that can lead to bubble formation.
• Use a brush or a short nap roller to evenly spread the epoxy resin on the surface.
• Avoid excessive stirring of the material during application to minimize air introduction.
• If you notice bubble formation, you can gently remove trapped air with an ultrasound device or a brush with fine bristles. By following these techniques, it will be possible to achieve a smooth finish free of bubbles in the application of epoxy resin.

Optimizing silicone mold curing

To optimize the curing of silicone molds, it is important to follow some fundamental guidelines:

1. Use high-quality silicone resins, specifically designed for molds, with the correct proportion of catalyst to ensure complete curing.
2. Ensure thorough mixing of the resin and catalyst to avoid air bubbles and ensure uniform polymerization.
3. Monitor the temperature and humidity of the working environment, as extreme conditions can affect the curing process.
4. Adhere to the curing times recommended by the manufacturer and allow enough time for the mold to reach maximum strength. By following these guidelines, optimal curing for silicone molds can be achieved.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85