Preventing Structural Defects in NatureResin

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Preventing Structural Defects in NatureResin

To prevent structural defects in NatureResin, a plant-based epoxy resin, it is crucial to follow some guidelines during the processing. Here are some useful tips:

• Make sure to thoroughly mix the resin with the hardener for the recommended time.
• Avoid creating air bubbles during mixing and pour the mixture evenly.
• Use a tool to remove any bubbles in the resin.
• Adhere to the drying and curing times indicated by the manufacturer.
• Protect the material from dust and external agents during the drying process.
• Verify the correct temperature and humidity in the working environment. By carefully following these instructions, it will be possible to achieve optimal results in working with NatureResin.

How to Avoid Bubbles in Epoxy Resin

To prevent the formation of bubbles in epoxy resin, it is important to carefully follow some steps during the processing. Here are some helpful tips:

• Make sure to thoroughly mix the epoxy resin with the hardener following the proportions recommended by the manufacturer.
• Avoid mixing too quickly to prevent introducing air into the mixture.
• Use a tall and narrow container to reduce bubble formation during mixing.
• Before pouring the resin, let it rest for a few minutes to allow larger bubbles to rise to the surface and remove them with a gas torch or a hot brush.
• Pour the resin slowly and evenly to prevent air from entering. By following these simple tips, you can significantly reduce the formation of bubbles in epoxy resin.

Techniques for achieving smooth surfaces with epoxy resin

To achieve smooth surfaces with epoxy resin, it is essential to follow some specific techniques:

1. Preparation: Ensure that the surface is clean, dry, and free from dust or grease.
2. Leveling: Pour the resin evenly on the surface and use a spatula to spread it uniformly.
3. Deaeration: To eliminate air bubbles, pass a gas torch over the resin to bring them to the surface.
4. Sanding and polishing: After complete curing, sand the surface with fine-grit sandpaper and polish it with a specific compound for resins. By following these techniques, you can achieve smooth surfaces that are perfectly finished with resin.

Preventing yellowing of epoxy resin

To prevent yellowing of epoxy resin, it is advisable to take some precautions. First of all, use high-quality epoxy resins that contain UV stabilizers to protect against deterioration caused by sunlight. Additionally, it is important to apply a clear UV-resistant coating on the surface of the cured resin to shield it from the harmful effects of sunlight. Avoid prolonged exposure to direct sunlight and keep epoxy resin artifacts shielded from light when not in use. Following these precautions will help maintain the transparency and brilliance of the resin over time.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85