Reducing defects in advanced decorative applications

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Reducing defects in advanced decorative applications

To reduce defects in advanced decorative applications, it is essential to follow some precautions:

• Use high-quality resins and specific silicones for the decorative sector.
• Ensure that the surface to be coated is clean, dry, and properly prepared.
• Apply the coatings carefully, avoiding excesses or deficiencies.
• Use appropriate tools and follow the manufacturer's instructions for correct application.
• Pay particular attention to environmental conditions during application, such as temperature and humidity.
• Periodically check the status of the application to promptly address any defects. By following these guidelines, it is possible to achieve high-quality decorative results and minimize defects on the treated surfaces.

Improving epoxy resin finish

To enhance the finish of an epoxy resin surface, you can follow some key steps:

• Ensure that the surface is clean and free from dust or residues.
• Use fine sandpaper to gently sand the surface, removing any irregularities.
• Apply a thin layer of transparent epoxy resin to even out the surface and enhance its glossiness.
• Avoid touching the resin during drying to prevent imperfections.
• If necessary, repeat the application of the resin layer to achieve an even smoother and shinier finish. By carefully following these steps, you can achieve a flawless finish on the epoxy resin surface.

Techniques for perfect silicone molds

To achieve perfect silicone molds, it is essential to follow some specific techniques:

• Ensure that the surface of the model is clean and free from dust or grease.
• Use a primer or a release spray to facilitate the removal of the silicone.
• Thoroughly mix the silicone according to the manufacturer's instructions to avoid air bubbles.
• Pour the silicone slowly onto the model to prevent air traps.
• Make sure the silicone is completely cured before removing it.
• If necessary, use a precise cut to open the mold without damaging it. By following these techniques, high-quality silicone molds can be obtained for various DIY applications.

Pigment recommendations for transparent resin

Pigments for transparent resin are essential to customize and color resin creations. Here are some useful tips to achieve optimal results:

1. Choose transparent or semi-transparent pigments to maintain the resin's transparency.
2. Opt for pigments specifically formulated for epoxy or polyurethane resins for better mixability.
3. Measure them carefully to avoid resin alterations, following the manufacturer's instructions.
4. Thoroughly mix the pigment into the resin to achieve a uniform color.
5. Experiment with different quantities and pigment combinations to create unique and personalized shades.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85