Reducing errors in resin processing

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Reducing errors in resin processing

To reduce errors in resin processing, follow these guidelines:

• Make sure to accurately measure the quantities of resin and hardener to achieve the right ratio.
• Mix gently to avoid air bubbles in the resin.
• Use a well-ventilated environment and always wear eye and hand protection.
• Follow the manufacturer's instructions closely for curing times and processing temperatures.
• Avoid pouring the resin too quickly to prevent leaks and build-ups.
• Practice on small projects before tackling more complex works.
• Clean your tools thoroughly to prevent contaminations in the resin. By following these guidelines, you can significantly reduce errors in your resin processing.

How to Prevent Bubbles in Clear Epoxy Resin

Bubbles in clear epoxy resin can be avoided by following some correct practices during the processing:

1. Make sure to work in a clean and well-ventilated environment.
2. Thoroughly mix the resin and the hardener following the manufacturer's instructions.
3. Avoid mixing too quickly to prevent introducing air bubbles.
4. Use a brush to eliminate any bubbles on the surface after pouring the resin.
5. You can also use a gas torch to remove larger bubbles.
6. If necessary, let the resin rest for a few minutes before pouring to allow bubbles to rise to the surface and then eliminate them with a torch or a brush. By following these guidelines, you can achieve bubble-free results in your clear epoxy resin.

Improving the Finish of Epoxy Resin Artifacts

To enhance the finish of epoxy resin artifacts, it is advisable to follow some essential steps:

• Carefully sand the surface to remove any imperfections and achieve a smooth and uniform surface.
• Use a transparent resin-based or preferably silicone-based varnish to protect and enhance the finish.
• Apply multiple thin layers of varnish to prevent the formation of air bubbles or swellings.
• Use high-quality equipment and tools to ensure a professional result.
• Follow the manufacturer's instructions carefully to achieve the best possible results. By following these tips, it will be possible to obtain epoxy resin artifacts with impeccable and high-quality finishes.

Techniques for achieving smooth surfaces with epoxy resin

To achieve smooth surfaces with epoxy resin, it is essential to follow some specific techniques:

1. Preparation: Make sure the surface is clean, dry, and free from grease or dust.
2. Mixing: Thoroughly mix the resin and hardener according to the manufacturer's instructions to avoid air bubbles.
3. Application: Spread the resin layer evenly on the object or surface to be coated.
4. Leveling: Use a brush or spatula to distribute the resin evenly and smooth out any irregularities.
5. Bubble elimination: Gently pass a torch or flame brush over the surface to eliminate trapped air bubbles. By carefully following these techniques, you will achieve smooth and uniform surfaces with epoxy resin.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85