Stabilizing resin during casting

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Stabilizing resin during casting

During the resin casting process, stabilizing the material is essential to achieve optimal results. Here are some steps to follow to ensure proper stabilization of the resin during the casting process:

• Use a degassing agent to remove any air bubbles present in the resin.
• Thoroughly mix the resin and hardener following the proportions recommended by the manufacturer.
• Avoid over-agitating the mixture to prevent introducing additional air bubbles.
• Let the mixture rest for a few minutes before proceeding with the casting to allow any air bubbles to rise to the surface and disappear.
• Use specific tools such as a vacuum chamber to completely eliminate air bubbles before casting. By carefully following these steps, proper stabilization of the resin during casting can be ensured.

How to Prevent Bubbles in Epoxy Resin

To prevent the formation of bubbles in epoxy resin, it is essential to carefully follow some precautions during the processing. Here are some useful tips:

• Degassing the resin: use a device to remove air bubbles from the resin before pouring it into the mold.
• Pouring slowly: pour the resin slowly into the mold to minimize the entry of air.
• Use a gas torch or a hot brush: gently pass the flame over the poured resin to bring the bubbles to the surface.
• Avoid air drafts: work in an environment free from air drafts to prevent the introduction of bubbles into the liquid resin. By following these tips, it will be possible to achieve bubble-free epoxy resin works.

Techniques for a perfect resin pour

To achieve a perfect resin pour, it is essential to follow some precise techniques:

1. Preparation: Ensure that the surface is clean, leveled, and free from dust or grease.
2. Measurement: Accurately respect the proportions between resin and hardener to avoid polymerization issues.
3. Mixing: Gently mix to avoid air bubbles, preferably using a low-speed stirrer.
4. Pouring: Pour the resin slowly and evenly to prevent build-ups and air bubbles.
5. Leveling: If necessary, level the resin with a brush or spatula to ensure a smooth surface.
6. Drying: Let the resin dry in a dust-free and dry environment, following the recommended curing times. By following these techniques, you will achieve a flawless and perfect resin pour.

Tips for achieving smooth surfaces with epoxy resin

To achieve smooth surfaces with epoxy resin, follow these helpful tips:

• Make sure to thoroughly mix the resin with the hardener for the recommended time, avoiding air bubbles.
• Use a brush or a spatula to evenly spread the resin on the surface, avoiding build-ups and streaks.
• Cover the object with a lid or a dome to protect it from dust during the curing process.
• When the resin is partially cured, gently brush it with isopropyl alcohol to remove any irregularities.
• Finally, allow the resin to dry in a clean, dust-free environment to prevent imperfections on the surface.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85