Cleaning fresh adhesives on fiberglass

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Cleaning fresh adhesives on fiberglass

To clean fresh adhesives on fiberglass, it is advisable to follow these steps:

1. Use a specific solvent for resins, such as acetone or isopropyl alcohol, to dissolve the fresh adhesive without damaging the fiberglass.
2. Apply the solvent on the adhesive and let it sit for a few minutes to soften it.
3. Use a scraper or a spatula to gently remove the softened adhesive from the fiberglass surface.
4. Repeat the process if necessary until completely removing the fresh adhesive.
5. Finally, clean the treated area with a mild detergent to remove any solvent residues and restore the shine of the fiberglass.

Epoxy resin for cleaning

Epoxy resin is a very versatile and resistant material, mainly used to create smooth and glossy coatings and surfaces. However, it is not suitable for cleaning as it is a rather hard and non-porous material. To clean epoxy resin and remove any residues or stains, it is advisable to use a gentle and non-abrasive detergent, along with a soft cloth or sponge. Avoid using aggressive solvents or overly strong chemicals that could damage the surface of the epoxy resin. Always remember to follow the manufacturer's instructions to keep your epoxy resin in optimal condition.

**Removing Fresh Glue from Epoxy Resin**

To remove fresh glue from an epoxy resin surface, it is advisable to act promptly. Here are some steps to follow:

1. Cooling: Harden the fresh glue with ice or a cold air stream.
2. Scraping: Gently scrape off the hardened glue with a plastic spatula or a stiff card.
3. Cleaning: Apply a mild detergent to the surface to remove any glue residues.
4. Acetone: If necessary, dab with a cotton ball soaked in acetone to eliminate any stubborn stains.
5. Rinsing: Finally, rinse the surface thoroughly with clean water and dry it carefully. By following these instructions, it will be possible to remove fresh glue from the epoxy resin without damaging the underlying material.

Epoxy resin cleaning solvent

To clean epoxy resin, it is advisable to use a specific solvent such as acetone. Acetone is effective in quickly removing epoxy resin without damaging the surrounding surfaces. Before using acetone, make sure to wear protective gloves and work in a well-ventilated area. Apply the acetone to the epoxy resin with a clean, dry cloth, being careful not to let the liquid come into contact with other surfaces. After removing the resin, thoroughly clean the area with water and soap to eliminate any solvent residues.

How to Remove Fresh Glue from Fiberglass

To remove fresh glue from fiberglass, it is important to act promptly. Here are some steps to follow:

1. Drying: Make sure the fresh glue is still wet. If it has already dried, it may be harder to remove.
2. Scraping: Use a spatula or a scraper to gently remove excess glue without damaging the surface of the fiberglass.
3. Degreaser: Apply a degreaser to the affected area and let it sit for a few minutes to soften the glue.
4. Microfiber Cloth: Use a microfiber cloth to gently rub the glue and remove it completely.
5. Rinse: Finally, rinse thoroughly with clean water to remove any glue and detergent residues. By following these steps, you should be able to effectively remove fresh glue from fiberglass.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85