Cleaning uncured adhesives in the workshop

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Cleaning uncured adhesives in the workshop

To clean uncured adhesives in the workshop, you can follow some simple steps:

1. Use a specific solvent for the type of adhesive used.
2. Apply the solvent on a clean cloth and gently rub it on the affected surface.
3. If necessary, use non-abrasive tools to remove any adhesive residues.
4. Repeat the process several times, if needed, until the uncured adhesive is completely removed.
5. Finally, make sure to adequately ventilate the work area and properly dispose of the waste. By following these steps, it will be possible to effectively clean uncured adhesives in the workshop without damaging the surrounding surfaces.

How to Remove Uncured Adhesives in the Workshop

To remove uncured adhesives in the workshop, you can follow some effective steps:

1. Use specific solvents for the type of adhesive to be removed, such as acetone or isopropyl alcohol.
2. Gently heat the adhesive with a hairdryer to make it more malleable and facilitate removal.
3. Use scrapers or spatulas to gently remove the adhesive from surfaces.
4. If necessary, soak the object in hot water to further soften the adhesive.
5. Repeat the cleaning process until the adhesive is completely removed. By carefully following these instructions, it will be possible to remove uncured adhesives effectively and without damaging the surfaces.

Best methods for cleaning fresh glues in the workshop

To clean fresh glues in the workshop, the most effective methods are:

• Use a solvent specific to the type of glue used, such as acetone for phenolic resin-based glues or isopropyl alcohol for epoxy resin-based glues.
• Rinse the surfaces with hot water and soap to remove residues of unhardened glue.
• Use a scraper or spatula to mechanically remove excess hardened glue.
• Alternatively, specific commercial products for cleaning surfaces from glues and resins can be used.
• Pay attention to properly ventilate the environment when using solvents and chemical cleaning products.

Remedies to remove uncured adhesives in the workplace

To remove uncured adhesives in the workplace, several effective remedies can be adopted:

• Use specific solvents for the type of adhesive used
• Apply heat using a hairdryer or a heat gun to soften the adhesive
• Gently scrape the adhesive with a spatula or a scraper
• Use chemicals such as acetone or isopropyl alcohol to dissolve the adhesive
• If the adhesive is still fresh, dab it with a cloth soaked in hot water and soap It is important to act promptly to prevent the adhesive from fully hardening. Before using any method, make sure to consult the technical data sheets of the products and take necessary precautions for your safety.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85