**Easily Remove Industrial Adhesives**

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

**Easily Remove Industrial Adhesives**

To easily remove industrial adhesives, you can follow some simple steps:

• Use a hairdryer to heat the adhesive: the heat will soften the adhesive, making it easier to remove.
• Apply a specific adhesive solvent or acetone on a clean cloth and gently dab the adhesive.
• If the adhesive is on a resistant surface, such as metal or glass, you can use a spatula to scrape it off.
• Alternatively, there are specific products for adhesive removal available for purchase at DIY stores or hardware stores. By following these instructions, you will be able to effectively remove industrial adhesives without damaging the underlying surfaces.

Best Solvents for Removing Industrial Adhesives

The best solvents for removing industrial adhesives are those based on acetone, methyl ethyl ketone peroxide (MEK), and hydrocarbon-based solvents such as exorcin. These substances are effective in removing adhesive residues from industrial surfaces without damaging them. It is important to follow the manufacturer's instructions and use protective gloves during application. Additionally, make sure to work in a well-ventilated area to avoid exposure to fumes. If you have any doubts about the use of specific solvents, consult a professional in the field or a safety expert.

Techniques for removing industrial adhesives without damaging surfaces

To remove industrial adhesives without damaging surfaces, it is possible to use several effective techniques. Here are some recommended methods:

• Use a hairdryer to gently heat the adhesive and facilitate its removal.
• Apply vegetable or coconut oil on the adhesive and let it sit to soften it.
• Employ a mild degreasing detergent to dissolve the adhesive without harming the surface.
• Proceed with the use of isopropyl alcohol to effectively remove the adhesive.
• Use a plastic scraper or a spatula to gently peel off the adhesive from surfaces. By following these techniques, it is possible to eliminate industrial adhesives without causing damage to the underlying surfaces.

How to Remove Industrial Adhesives Quickly and Safely

To remove industrial adhesives quickly and safely, you can follow these steps:

1. Heating: Use a hairdryer to heat the adhesive, making it softer and easier to remove.
2. Solvent Use: Try solvents such as acetone or isopropyl alcohol to safely dissolve the adhesive. Be sure to test the solvent on a small hidden area to avoid damage.
3. Removal Tools: Use plastic scrapers or abrasive cards to gently detach the adhesive without damaging the underlying surface.
4. Final Cleaning: After removing the adhesive, clean the area with water and soap to eliminate any residues. Always remember to wear protective gloves and work in a well-ventilated area during the industrial adhesive removal process.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85