**Quick Label Removal**

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

**Quick Label Removal**

To quickly remove labels, you can use a specific adhesive residue solvent. Follow these steps:

1. Purchase a gentle solvent to prevent damage to surfaces.
2. Apply the solvent to the edge of the label and let it sit for a few minutes.
3. Gently peel off the label with your fingers or with the help of a spatula.
4. If any glue residue remains, repeat the solvent application and clean with a cloth.
5. Finally, wash the surface with water and soap to remove any remaining traces. Always remember to test the solvent on a small hidden area to check compatibility with the material.

- Removing resin labels

To remove labels from resin, you can follow these steps:

1. Fill a container with warm water and add some mild detergent.
2. Immerse the object with the label in the solution and let it soak for about 30 minutes.
3. Use a spatula or a scraper to gently peel off the label.
4. If there is any glue residue left, you can remove it with a cloth soaked in denatured alcohol.
5. Finally, dry the object thoroughly with a clean cloth. This method should help you effectively remove labels from resin without damaging the surface.

Removing silicone labels

To effectively remove silicone labels, follow these steps:

1. Soak the label: immerse the object in hot water to soften the silicone.
2. Rub with oil or alcohol: use olive oil or alcohol to gently rub the label and remove it.
3. Scrape carefully: with a plastic spatula or a blade, scrape off the label without damaging the underlying surface.
4. Clean residue: use a degreasing detergent to eliminate any glue or silicone residues. By following these steps, you can remove silicone labels without damaging the underlying objects.

Removing DIY adhesives

To remove DIY adhesives, it is important to follow some steps. First of all, you can use acetone or isopropyl alcohol to soften the adhesive and make it easier to remove. Then, with the help of a spatula or scraper, you can gently scrape the adhesive off the surface. Alternatively, you can use specific products for adhesive removal, easily available on the market. It is essential to always test the product on a small hidden area to ensure it does not damage the underlying surface. Finally, once the adhesive is removed, it is advisable to thoroughly clean the surface with water and soap to eliminate any residues.

Quickly Get Rid of Pigment Stickers

To quickly get rid of pigment stickers, you can use a specific solvent to remove adhesives and glue residues. Follow these steps:

1. Apply the solvent on the surface with a clean cloth.
2. Let it sit for a few minutes to soften the pigment.
3. Use a spatula or scraper to gently remove the sticker.
4. Repeat the process if necessary until completely eliminating the residues.
5. Finally, thoroughly clean the treated area with a mild detergent to remove any solvent traces. Remember to test the solvent on a small hidden area to check compatibility with the surface.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85