Release agent for acrylic and vinyl adhesives

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Release agent for acrylic and vinyl adhesives

The release agent for acrylic and vinyl adhesives is an essential product to facilitate the removal of adhesives and resins from various surfaces. This type of release agent works by breaking the bond between the glue and the substrate, allowing for easy removal of the bonded objects without damaging the underlying surfaces. It is particularly useful in the DIY and industrial sectors, where removing adhesives can be a delicate task. Before application, it is advisable to test the release agent on a small area to check compatibility with the material to be treated. Follow the manufacturer's instructions carefully for correct and effective use.

Mold Release Agent for Silicone Molds

A mold release agent for silicone molds is a crucial product to facilitate the removal of artifacts from molds without damaging them. This type of release agent forms a thin layer between the material and the silicone, preventing adhesion. It is usually available in different forms such as spray, liquid, or paste. It is important to choose a release agent that is compatible with silicone to ensure maximum effectiveness and material protection. Before application, make sure to thoroughly clean and dry the mold to achieve optimal results. Always remember to carefully follow the manufacturer's instructions for proper and safe use.

How to Use Pigments in Epoxy Resin

Adding pigments to epoxy resin is an effective way to color and customize resin creations. Here is how to use them correctly:

1. Pigment selection: Choose pigments specifically designed for resin, not for other applications.
2. Measurement: Precisely measure the pigment based on the amount of resin used.
3. Thorough mixing: Carefully blend the pigment into the resin to achieve a uniform color.
4. Color testing: Before pouring into the mold, check the achieved color.
5. Adjustments: If the color is not as desired, add more pigment and mix again. By following these steps, you can achieve stunning results with pigments in epoxy resin.

DIY Epoxy Resin Tutorial

Creating artistic creations with epoxy resin is a creative and fulfilling activity. To make jewelry, decorative objects, or coatings with epoxy resin in a DIY way, follow these steps:

1. Prepare the work area with suitable protections and ventilation.
2. Precisely measure the amount of epoxy resin and hardener.
3. Mix the two components following the recommended proportions.
4. Add colors, pigments, or decorative inserts, if desired.
5. Pour the resin into the molds and let it cure following the drying times.
6. Carefully remove the creations from the molds and polish them if necessary. By carefully following these steps, you can create splendid artistic works with epoxy resin.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85