Release agent for fresh resin surfaces

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Release agent for fresh resin surfaces

The release agent for fresh resin surfaces is a product used to prevent fresh resins from sticking to certain surfaces during the processing. This product forms a protective layer between the fresh resin and the surface, facilitating detachment once the resin has solidified. It is particularly useful in applications of epoxy resins, polyurethanes, or other resins used in DIY or industrial settings. The release agent for fresh resin surfaces helps achieve smooth and defect-free finishes, protecting the underlying surfaces from damage or resin residues.

Epoxy resin release agent

The epoxy resin release agent is a fundamental product to facilitate the removal of epoxy resin forms from mold surfaces. This anti-adhesive agent forms a separating layer between the resin and the support, preventing adhesion and facilitating detachment once hardened. Applied before pouring the resin, the release agent ensures easy extraction of the finished artifact, reducing the risk of surface damage. It is available in various forms, such as spray or liquid, and must be chosen based on the type of epoxy resin used and the mold support.

How to remove epoxy resin from surfaces

To remove epoxy resin from surfaces, follow these steps:

1. Heat the resin with a hairdryer to make it softer and easier to remove.
2. Use a spatula or a scraper to gently detach the resin from the surface.
3. Apply acetone on a cloth and dab the affected area to further dissolve the resin.
4. If necessary, repeat the process until the resin is completely removed.
5. Finally, clean the surface with water and soap to eliminate any epoxy resin residues. Remember to work in a well-ventilated area and wear protective gloves during the resin removal.

Mold release agent for silicone molds

A mold release agent for silicone molds is an essential product to facilitate the removal of artifacts without damaging the mold material. These release agents are specially formulated to ensure easy extraction of objects, minimizing the risk of silicone breakage or deformation. Usually available in different formats (spray, liquid, or powder), mold release agents for silicone molds create a protective barrier that allows easy separation of the artifact without compromising its quality. Make sure to apply the release agent evenly and follow the instructions carefully to achieve the best results.

Epoxy Resin Mold Release Agent for DIY Projects

The epoxy resin mold release agent for DIY projects is a crucial product to prevent resin from sticking to molds, tools, or surfaces during the processing phase. It is a solution that, when applied correctly, creates a barrier between the resin and the substrate, easing the subsequent removal of the artifact without causing any damage. It is advisable to choose a specific release agent for epoxy resins to ensure maximum effectiveness and compatibility with the material. Before using the release agent, make sure to carefully follow the manufacturer's instructions to achieve the best possible results.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85