Release agent for mixed surfaces

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Release agent for mixed surfaces

The release agent for mixed surfaces is a product used to facilitate the removal of molds from various surfaces during resin, silicone, or coating works. This release agent is particularly useful when working on different materials, such as wood, metal, or plastic, as it helps prevent adhesion and facilitates separation without damaging the surface or the manufactured article. Applied uniformly and in accordance with the manufacturer's instructions, the release agent for mixed surfaces ensures smooth processing and a quality end result. It is important to choose the right release agent based on the type of material and the work to be carried out.

- Epoxy resin mold release agent

An epoxy resin mold release agent is a product used to prevent the adhesion of resin to molds or surfaces during the casting process. This product creates a barrier that facilitates the release of the resin once it has hardened, reducing the risk of damaging the finished product. Epoxy resin mold release agents are available in different forms, such as sprays, liquids, or wax, and are chosen based on the type of resin and the material onto which it will be poured. It is important to carefully follow the usage instructions to achieve the best results and ensure effective and uniform release.

- How to Use Mold Release Agent for Silicone Molds

To use the mold release agent for silicone molds, follow these steps carefully:

1. Thoroughly clean the silicone mold to remove any dust or dirt residues.
2. Shake the mold release agent well and spray it evenly on the inner surface of the mold from a distance of about 20-30 cm.
3. Allow the mold release agent to dry for a few minutes, following the manufacturer's instructions.
4. Pour the casting material into the prepared mold, taking care not to damage the coating with the release agent.
5. Once the casting material has hardened, gently remove the artifact from the mold, which will easily detach thanks to the mold release agent. By correctly following these steps, you can obtain high-quality silicone molds and prolong their lifespan.

- Mold release agent for resin pigments

The mold release agent for resin pigments is an additive used to prevent the clumping of pigments during the processing of epoxy or polyurethane resins. This product facilitates the uniform dispersion of pigments within the resin, improving the color stability and final brightness of the coating. The release agent acts by reducing friction between pigment particles, preventing them from clumping together and ensuring even distribution. Additionally, it helps prevent the formation of unwanted lumps, ensuring a high-quality final appearance of the product. Using the mold release agent for resin pigments is particularly recommended for DIY enthusiasts or craft producers of coatings.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85