Release agent for removing sticky resins

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Release agent for removing sticky resins

To effectively remove sticky resins, it is essential to use a specific release agent. Release agents are products formulated to facilitate the removal of adhesives, resins, and sticky materials from various surfaces without damaging them. Before application, make sure the release agent is compatible with the type of resin to be removed. Follow the instructions carefully and apply the product to the surface of interest. Allow it to act for the recommended time and then proceed with cleaning using a clean cloth. Remember to test the release agent on a small hidden area to verify compatibility with the underlying material.

Epoxy resin mold release agent

The epoxy resin mold release agent is a product used to prevent adhesion and facilitate the removal of epoxy resins from molds, equipment, or work surfaces. This type of release agent forms a separating layer between the resin and the support, thus facilitating the subsequent extraction without damaging the material. It is essential to apply the release agent evenly and following the manufacturer's instructions to ensure its effectiveness. Furthermore, make sure to choose a specific release agent for epoxy resins to achieve optimal results and preserve the quality of the treated surfaces.

How to Remove Epoxy Resin

To effectively remove epoxy resin, you can follow these steps:

1. Use a scraper or spatula to gently remove the hardened resin from the surface.
2. Heat the resin with a hairdryer to make it more pliable and easier to remove.
3. Apply acetone or isopropyl alcohol to the resin to dissolve it and make it easier to eliminate.
4. Use fine-grit sandpaper to smooth out any remaining resin residues on the surface.
5. Finally, thoroughly clean the treated area with water and soap to completely remove any traces of epoxy resin. By following these simple steps, you can remove epoxy resin effectively without damaging the underlying surface.

Epoxy resin solvent

An epoxy resin solvent is a chemical compound used to dissolve or dilute epoxy resins. This type of solvent is useful for cleaning tools and surfaces contaminated with epoxy resin, as well as for adjusting the viscosity of the resin itself. It is important to choose the appropriate solvent based on the type of epoxy resin used, as some solvents may not be compatible or may affect the resin properties. Before using an epoxy resin solvent, it is advisable to consult the manufacturer's instructions and follow safety regulations for handling chemicals.

Method to remove hardened resin

To remove hardened resin, you can follow an effective and safe method. Here's what you can do:

• Start by gently scraping the surface with a spatula or scraper to remove the outer layer of the resin.
• Next, heat the resin with a hairdryer to soften it.
• Then, use a specific solvent for resins, such as acetone, to further dissolve the material and ease its removal.
• After applying the solvent, proceed to rub with a clean cloth to completely eliminate the hardened resin.
• Finally, thoroughly wash the treated area with water and soap to remove any residues. By following these steps, you will be able to effectively remove the hardened resin from the desired surfaces.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85