Release agent spray for adhesive residues

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Release agent spray for adhesive residues

The release agent spray for adhesive residues is a specific product used to easily and effectively remove adhesive residues from different surfaces. This type of spray is particularly useful in the DIY and home improvement sector, but it is also used in industrial applications. Thanks to its formulation based on gentle solvents, the release agent for adhesive residues acts in a targeted manner without damaging the underlying surface. It is important to carefully follow the usage instructions and pay attention to the precautions indicated on the packaging for a safe and effective use of this product.

Epoxy resin release spray

The epoxy resin release spray is a product used to facilitate the removal of epoxy resin from molds, surfaces, or equipment. This type of spray creates a protective layer between the resin and the support, making detachment easier without damaging the material or leaving residues. It is particularly useful in the DIY and crafting sector, where epoxy resin is commonly used to create jewelry, decorations, or coatings. By evenly applying the release spray to the desired surface, the risk of adhesion is significantly reduced, ensuring easy extraction of the artifact once the resin hardening phase is complete.

How to Remove Epoxy Resin from Molds

To effectively remove epoxy resin from molds, you can follow these steps:

1. Use a specific solvent for epoxy resins, such as acetone or isopropyl alcohol, to soften the resin.
2. Apply the solvent to the resin surface and let it sit for a few minutes.
3. Use a non-abrasive tool, such as a plastic spatula, to gently scrape off the softened resin.
4. If necessary, repeat the process until all the resin has been removed.
5. Finally, thoroughly wash the mold with water and soap to remove any resin and solvent residues. These steps will help you clean the molds effectively without causing damage.

**Guide to Cleaning Silicone Molds**

Cleaning silicone molds is essential to ensure quality and durability over time. Here is a practical guide to clean them properly:

1. Prepare a solution with warm water and mild soap.
2. Immerse the mold in the solution and gently scrub it with a soft sponge.
3. Rinse thoroughly with clean water.
4. If necessary, you can disinfect the mold with a solution of water and vinegar or denatured alcohol.
5. Dry the mold thoroughly with a clean cloth and let it air dry completely before storing it. By following these simple steps, you will keep your silicone molds clean and ready for reuse without any issues.

Techniques for removing pigments from epoxy resin

To remove pigments from epoxy resin, there are several effective techniques:

• Use chemical solvents such as acetone or isopropyl alcohol to dissolve and remove the pigments.
• Apply heat with a hairdryer or heat gun to soften the resin and facilitate the removal of pigments with a scraper or a spatula.
• Use specific products for cleaning epoxy resin, such as degreasers or mild detergents.
• If the pigments are superficial, it is possible to sand the resin with fine sandpaper or abrasive pads to remove them. It is important to test these techniques on a small hidden area to verify that they do not damage the epoxy resin.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85