Release agent spray for multilayer surfaces

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Release agent spray for multilayer surfaces

The release agent spray for multilayer surfaces is a specific product used in the coatings and resins sector. This type of spray is designed to facilitate the removal of multilayer coatings, such as paints, enamels, or resins, from various surfaces. Thanks to its specially formulated composition, the release agent creates a layer that separates the coating from the underlying surface, thus facilitating its removal. This product is particularly useful in the DIY and professional field, where the removal of multilayer coatings can be complex and require targeted and delicate action to preserve the integrity of the treated surfaces.

How to Use Mold Release Spray

Mold release spray is a product mainly used in the epoxy resin and silicone sectors to facilitate the removal of castings from molds, molds, or work surfaces. To use it correctly, follow these steps:

1. Make sure the surface is clean and dry.
2. Shake the mold release spray can well.
3. Spray a thin, even layer on the surface to be treated.
4. Allow it to dry for the time recommended by the manufacturer.
5. Apply the desired material and proceed with the processing.
6. For greater effectiveness, repeat the application of the mold release spray before each use. By following these simple steps, you can make the most of the properties of the mold release product.

**Multi-layer printing technique**

Multi-layer prints are created by overlaying multiple layers of epoxy resins or coatings on a substrate. To achieve high-quality results, it is essential to follow a precise technique:

1. Surface preparation: Ensure that it is clean and smooth.
2. Application of the first layer: Spread the resin or coating evenly and let it dry completely.
3. Application of subsequent layers: Repeat the process, paying attention to maintaining consistency and uniformity.
4. Leveling and finishing: Ensure that each layer is well leveled and uniform.
5. Curing and hardening: Carefully follow the drying times and any baking process. By following this technique, high-quality and durable multi-layer prints can be achieved.

Transparent resin pigments

Transparent resin pigments are special colorants used to dye transparent epoxy, polyurethane, or polyester resins. These pigments are designed to maintain the transparency of the resin, allowing you to add color without compromising the clarity of the material. Available in various shades, they can be used to create decorative and artistic effects in objects made with transparent resin, such as jewelry, decorative items, and coatings. It is important to carefully follow the recommended doses and mixing techniques to achieve optimal results and ensure an even distribution of color in the resin.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85