Release agent that acts deeply without scratching

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Release agent that acts deeply without scratching

The release agent that acts deeply without scratching is essential to ensure effective and gentle removal of epoxies, silicones, and coatings. This type of product is designed to penetrate deeply into the material to be removed, facilitating detachment without damaging the underlying surface. Thanks to its specific formulation, the release agent ensures a quick and complete action, minimizing the risk of scratches or damage during the removal process. It is ideal for both professional and DIY uses, guaranteeing optimal results safely and effectively.

**Mold Release Agent for Resin**

The mold release agent for resin is a fundamental product in the field of epoxy resins and coatings. It is a substance that, once applied to the mold, prevents the resin from adhering to the surface during the casting and solidification process. In this way, the removal of the finished product is greatly facilitated, reducing the risk of damaging the mold itself. The mold release agent for resin is available in different formulations, such as silicone-based release agents, releasing sprays, or specific chemical agents, each suitable for different types of resins and mold materials.

How to use silicone mold release agent

To correctly use a silicone mold release agent, carefully follow these steps:

1. Thoroughly clean the surface where the silicone will be applied.
2. Shake the mold release agent well and spray it evenly onto the surface.
3. Allow the mold release agent to dry for the recommended time on the packaging.
4. Apply the silicone to the surface treated with the mold release agent.
5. Let the silicone dry according to the manufacturer's instructions.
6. Once completely dry, remove any excess material with care. Always remember to follow the specific instructions provided by the mold release agent manufacturer to achieve the best results.

Resin release solvent

A resin release solvent is a product used to facilitate the removal of cured resins from molds, equipment, or work surfaces. This type of solvent works by breaking the resin's adhesion to the surface, making it easier to separate without damaging the underlying material. It is important to choose a release solvent compatible with the type of resin used to achieve the best results. Before application, it is advisable to carefully follow the manufacturer's instructions and take appropriate safety precautions when using chemical solvents.

DIY Mold Release Spray

The DIY mold release spray is a product used to facilitate the release of molds and shapes from surfaces during DIY projects. This spray creates a lubricating layer between the object and the material it is placed on, reducing friction and facilitating separation. It is particularly useful in creating objects with epoxy resin or silicone, ensuring that the finished object is released cleanly and without damage. Before use, it is advisable to carefully read the instructions and ensure that the release agent is compatible with the materials used to avoid adhesion or finishing issues.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85