Removing acrylic adhesives from metal

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Removing acrylic adhesives from metal

To remove acrylic adhesives from metal, you can follow some effective steps:

1. Use a hairdryer to gently heat the adhesive and make it easier to peel off.
2. Apply a specific adhesive solvent to the residue and let it sit for a few minutes to soften the adhesive.
3. Use a spatula or scraper to gently remove the softened adhesive from the metal.
4. Clean the area with a degreasing detergent to remove any adhesive and solvent residues. Always remember to test the solvent on a small hidden area of the metal to check compatibility and work in a well-ventilated area.

How to Remove Epoxy Resin from Metal

To remove epoxy resin from metal, you can follow these steps:

• Scraping: Use a sharp tool to gently scrape off the hardened resin.
• Heating: Apply heat to the resin to soften it and make removal easier.
• Chemical Solvents: Try solvents such as acetone or isopropyl alcohol to dissolve the resin.
• Sandpaper: If the resin is stubborn, you can sand it off with fine-grit sandpaper.
• Specialized Tools: There are tools designed to remove resins from different surfaces. Remember to wear the necessary protective gear and follow the manufacturer's instructions to ensure safe and efficient removal.

Solvent for acrylic adhesives on metal

Solvents for acrylic adhesives on metal are chemical compounds designed to dissolve and remove adhesive residues from metal surfaces. These solvents are formulated to ensure effective cleaning of surfaces without damaging the underlying metal. Typically based on organic compounds, solvents for acrylic adhesives on metal work by dissolving the adhesives quickly and efficiently. It is important to carefully follow the instructions for use and use solvents in well-ventilated environments to ensure safety during application. Before using any solvent, it is advisable to test it on a small hidden area to verify compatibility with the metal in question.

**Technique for Removing Acrylic Adhesive from Metal Surfaces**

To remove acrylic adhesive from metal surfaces, you can follow this effective procedure:

1. Start by scraping off as much acrylic adhesive as possible using a spatula or a scraper.
2. Apply a specific solvent for acrylic adhesive to the residue remaining on the metal surface.
3. Allow the solvent to act for a few minutes to further soften the adhesive.
4. Use a clean cloth or a cotton swab soaked in solvent to gently rub the affected area.
5. Repeat the solvent application and cleaning until the acrylic adhesive is completely removed.
6. Finally, thoroughly rinse the metal surface with clean water and dry it with a dry cloth. By following these steps, you can effectively remove acrylic adhesive from metal surfaces.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85