Removing adhesive residues from smooth surfaces

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Removing adhesive residues from smooth surfaces

To remove adhesive residues from smooth surfaces, it is advisable to follow these steps:

1. Dampen a cloth with warm water and a mild detergent.
2. Gently dab the affected area to soften the adhesive.
3. Use a spatula or fine sandpaper to carefully remove the residues.
4. If the adhesive persists, apply a specific solvent for the type of adhesive and surface.
5. Thoroughly clean the treated area with water and neutral soap to remove any solvent residues. Always remember to test the solvent on a small hidden area to check its compatibility with the surface.

- Removing glue residue from epoxy resin

To remove glue residue from an epoxy resin surface, you can follow some effective steps:

1. Dampen a soft cloth with warm water and mild detergent.
2. Gently dab the affected area to soften the glue.
3. Use a plastic spatula to delicately remove the glue residue.
4. If the residue persists, it is recommended to use isopropyl alcohol to dissolve the glue.
5. Repeat the process until the surface is clean and free of residue. Avoid using aggressive solvents that could damage the resin. Always pay attention and test the products on a small, inconspicuous area.

How to Remove Glue from Epoxy Resin

To remove glue from epoxy resin, you can follow these steps:

1. Use a gentle solvent such as isopropyl alcohol to soften the glue.
2. Apply the solvent to the glue and let it sit for a few minutes.
3. Gently rub the softened glue with a clean cloth or a cotton swab.
4. Repeat the process until the glue is completely removed.
5. Finally, clean the area with water and soap to remove any solvent residue. It is important to be careful not to damage the resin surface during the glue removal process.

Cleaning epoxy resin from glue

To effectively clean epoxy resin from glue, it is advisable to follow these steps:

1. Use a specific solvent for resins or acetone to soften the glue on the surface.
2. With the help of a scraper or a plastic spatula, gently remove the excess glue without damaging the underlying resin.
3. Apply a degreasing detergent to the affected area and rub with a clean cloth to remove any glue residues.
4. If necessary, repeat the process until the surface is clean and free of glue traces. These simple steps will help you clean epoxy resin from glue safely and without damaging the underlying material.

Removing glue traces from epoxy resin

To remove glue traces from epoxy resin, you can follow some effective steps:

1. Diluted ammonia: Apply diluted ammonia on the resin surface and let it sit for a few minutes before cleaning it with a soft cloth.
2. Acetone or isopropyl alcohol: Use acetone or isopropyl alcohol to gently remove the glue traces, being careful not to damage the resin.
3. Fine sandpaper: If the traces are stubborn, you can try sanding them with fine sandpaper, making gentle movements to avoid scratching the surface.
4. Heating: Alternatively, you can try lightly heating the glue traces with a hairdryer and then carefully removing them. Always remember to test these methods on a small hidden area of the resin to avoid damage.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85