Removing adhesive residues on ceramic

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Removing adhesive residues on ceramic

To remove adhesive residues on ceramic, it is advisable to follow these steps:

1. Dampen a cloth with hot water and mild detergent.
2. Apply the cloth to the ceramic surface and let it sit for a few minutes.
3. Use a plastic spatula to gently scrape off the adhesive residues.
4. If the residues persist, apply a specific adhesive residue solvent on the ceramic.
5. Blot with a clean cloth to remove the loosened residues.
6. Finally, wash the surface with clean water and dry it carefully. These methods are effective for eliminating adhesive residues without damaging the ceramic.

Residual glues on ceramics

Residual glues on ceramics can be effectively removed by following some simple and safe steps. First of all, it is advisable to use a specific gentle solvent for glue residue on ceramics. Subsequently, one can proceed with caution using a plastic scraper or spatula to gently remove the residue without damaging the surface. Alternatively, hot water and mild soap can be used together with a non-abrasive sponge to soften the glue and remove it gently. It is important to avoid using aggressive solvents that could damage the ceramics.

How to remove glue residue from ceramic

To remove glue residue from ceramic, you can follow these steps:

1. Soak the glue: Use hot water and mild soap to soften the residual glue.
2. Gently scrape: Use a spatula or scraper to gently remove the glue residue without damaging the ceramic surface.
3. Apply a solvent: If the residues are stubborn, you can use a gentle solvent such as acetone or isopropyl alcohol to dissolve the remaining glue.
4. Clean and dry: After removing the glue, make sure to clean the surface thoroughly with clean water and dry it completely. By carefully following these steps, you can effectively remove glue residue from ceramic without damaging the underlying material.

Cleaning ceramics from hardened glue

To clean ceramics from hardened glue, it is advisable to follow these steps:

1. Soften the glue: use a specific solvent for the type of glue used.
2. Scrape gently: with a non-abrasive tool, remove the softened glue from the ceramic surface.
3. Clean with water and soap: after removing most of the glue, wash the ceramic with warm water and mild soap.
4. Dry thoroughly: use a soft cloth to completely dry the surface.
5. Check and repeat if necessary: check for any remaining glue and repeat the process if needed. By carefully following these steps, it will be possible to effectively clean ceramics from hardened glue.

Removing glue from ceramic surface

To remove glue from a ceramic surface, you can follow some effective steps:

1. Start by gently scraping the glue with a spatula or a razor blade to remove the top layer.
2. Next, dampen a cloth with acetone and gently dab the affected area to dissolve the remaining glue.
3. If acetone is not sufficient, try using a specific product for removing glue from ceramic surfaces.
4. After completely removing the glue, clean the surface thoroughly with water and mild soap to eliminate any residues. By following these steps carefully, it will be possible to effectively remove glue from a ceramic surface.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85