Removing decorative stickers from glossy surfaces

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Removing decorative stickers from glossy surfaces

To remove decorative stickers from glossy surfaces, you can follow these steps:

1. Moisten the sticker with hot water or a solution of water and neutral soap to soften it.
2. Use a spatula or a rigid card to gently peel off the sticker from the surfaces without scratching them.
3. If glue residues remain, you can apply isopropyl alcohol or acetone on a clean cloth to remove them.
4. After removing the sticker, clean the surface with a mild detergent to eliminate any traces of residue. By following these steps, it will be possible to effectively remove decorative stickers from glossy surfaces without causing damage.

- Adhesive Removal from Epoxy Resin

Removing adhesives from epoxy resin surfaces can be a delicate yet achievable task. Here are some steps to follow for an effective result:

• Dampen the adhesive with hot water or a gentle solvent.
• Use a plastic scraper or spatula to gently peel off the adhesive without damaging the resin.
• Apply a degreasing detergent on the surface to eliminate any glue residues.
• Rinse with clean water and dry carefully. Avoid using aggressive solvents that could damage the resin. If in doubt, it is advisable to consult a professional to ensure a safe and effective removal of adhesives.

How to Remove Stickers from Epoxy Resin

To remove stickers from epoxy resin, follow these steps:

1. Heat the sticker: use a hairdryer to gently heat the sticker and make it easier to remove.
2. Use a scraper: once heated, use a plastic scraper to slowly peel the sticker off the resin without damaging it.
3. Clean with isopropyl alcohol: after removing the sticker, clean the area with isopropyl alcohol to remove any residue.
4. Polish the surface: finally, polish the resin with a soft cloth to restore its original shine. By following these steps, you can effectively and safely remove stickers from epoxy resin.

Removing stickers from resin surfaces

To remove stickers from resin surfaces, it is advisable to follow these steps:

1. Moisten the sticker with hot water to soften it.
2. Use a spatula or a rigid card to gently detach the sticker from the resin.
3. Apply vegetable oil on the remaining adhesive part and let it sit for a few minutes.
4. Remove the oil and clean with a mild detergent to eliminate any residues.
5. Thoroughly dry the surface. Avoid using aggressive solvents that could damage the resin. If in doubt, it is advisable to test the method on a small, inconspicuous area.

Removing stickers from resin objects

To remove stickers from resin objects, you can follow some effective steps:

• Dampen the sticker with coconut or olive oil to soften it.
• Use a plastic scraper to gently remove the sticker without damaging the resin.
• Apply isopropyl alcohol with a cotton ball to remove any glue residues.
• If the sticker persists, you can try heating it with a hairdryer to make it easier to remove.
• Finally, clean the object with a mild detergent to eliminate any remaining traces of adhesive.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85