Removing epoxy adhesive residues

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Removing epoxy adhesive residues

To effectively remove epoxy adhesive residues, it is advisable to follow these steps:

• Use a specific chemical agent to dissolve the adhesive, such as acetone or isopropyl alcohol.
• Apply the chemical agent to the affected surface and let it sit for a few minutes to soften the adhesive.
• Use a scraper or a spatula to gently remove the softened residues.
• If the residues are particularly stubborn, you can repeat the application of the chemical agent and the scraping process.
• Finally, thoroughly clean the treated area with water and soap to remove any solvent residues. By carefully following these steps, it will be possible to remove epoxy adhesive residues effectively and safely.

Epoxy resin residues

Epoxy resin residues are the result of the hardening process of epoxy resin, commonly used as a coating or adhesive. These residues can be difficult to remove once fully hardened. To effectively eliminate epoxy resin residues, it is advisable to use specific solvents or scrapers for hard surfaces. It is important to carefully follow the manufacturer's instructions and use personal protective equipment when removing the residues. In case of doubts or difficulties, it is advisable to consult a professional in the field for a targeted and safe intervention.

How to Remove Epoxy Resin

To effectively remove epoxy resin, you can follow these steps:

1. Use a scraper or spatula to remove as much of the hardened resin as possible.
2. Apply a specific solvent for epoxy resins on the affected surface.
3. Let the solvent act for the recommended time, usually a few minutes.
4. Use a cloth or sponge to gently scrub and remove the softened resin.
5. Repeat the process if necessary until the resin is completely removed.
6. Finally, thoroughly clean the surface with water and soap to remove any solvent residues. This is how you can safely and effectively remove epoxy resin.

Cleaning epoxy adhesive

Cleaning epoxy adhesive can be done effectively by following a few simple steps:

1. Use a specific solvent for epoxy resins, such as acetone or isopropyl alcohol, to soften the adhesive.
2. Apply the solvent to the affected surface and let it sit for a few minutes to dissolve the adhesive.
3. Use a scraper or a spatula to gently remove the softened adhesive.
4. Clean the area with a cloth soaked in solvent to remove any residues.
5. Finally, wash the surface with water and soap to complete the cleaning process. By carefully following these steps, it will be possible to remove epoxy adhesive effectively and safely.

**Epoxy resin solvent**

Epoxy resin solvent is a chemical compound used to dissolve and remove cured epoxy resins. This type of solvent is essential for cleaning tools and surfaces contaminated with epoxy resin. It is important to choose a solvent that is compatible with the epoxy resin in use to ensure effective removal without damaging the underlying material. Before using any solvent, it is advisable to carefully read the manufacturer's instructions and take necessary precautions for personal safety. Specific solvents can be found at specialized stores that offer coating materials and DIY products.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85