Free shipping on orders over £29.85
Shipping Tracking!
Google
Facebook
The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces.
+ gloves & detailed instruction for FREE.
£33.85
The best choice for deep pouring:
✔️ Low exothermic reaction –> Castings up to 5cm [1,96”]
✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years
✔️ Highly mechanical resistant surface, for maximum scratchproof properties
✔️ Low viscosity –> Bubbles free
✔️ Long working time –> No rush in the process
✔️ Heat resistance –> Up to 70°C [158 F]
✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015
🌿 Cruelty Free, Vegan Friendly🐹
£16.85
✔️ Perfect transparency -> A true liquid crystal
✔️ High scratch resistance -> Ideal for tables!
✔️ UV filter for protection against yellowing -> 10 years warranty.
✔️ Heat Resistance (Up to 70°C)
✔️ Easy to use -> 2:1 mixing ratio
✔️ Odourless
✔️ 1,5сm layer per application
🌿 Cruelty Free, Vegan Friendly🐹
£11.65
Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>
£19.85
Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.
£13.45
“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form
Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.
£22.85
Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.
£22.45
EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.
£17.85
Removing fresh glue residues
To remove fresh glue residues, it is advisable to act promptly. Here are some steps to follow:
- Absorb: Use a clean cloth to absorb as much of the fresh glue as possible.
- Solvent: Try to remove the residue with a solvent specific to the type of glue used.
- Acetone: If the glue is resin-based, you can try using acetone to dissolve it.
- Scrape: If the residue has hardened, you can gently scrape it off with a spatula or scraper.
- Final cleaning: Finally, clean the area with water and soap to remove any remaining traces. Always remember to test the solvent or acetone on a small hidden area to check compatibility with the surface.
- Removing fresh glue residues
To remove fresh glue residues, you can follow some simple steps:
- Make sure the glue is still fresh and not completely dry.
- Use a clean and dry cloth to gently dab the affected area.
- If the glue is still soft, you can try to remove it with a cloth soaked in warm water and neutral soap.
- Alternatively, you can apply isopropyl alcohol on another clean cloth and gently rub on the glue residues.
- Repeat the process until the fresh glue is completely removed. Avoid using aggressive solvents that could damage the surfaces.
Cleaning silicone molds
To clean silicone molds, it is advisable to follow these steps:
- Start by removing dust and surface dirt with a soft cloth or a gentle brush.
- Prepare a solution of warm water and mild soap.
- Dip another sponge or a clean cloth in the solution and gently clean the silicone molds.
- Rinse thoroughly with clean water to remove any soap residue.
- Dry the molds thoroughly with a dry, soft cloth.
- For a deeper cleaning, you can also use diluted isopropyl alcohol. By following these simple steps, you can keep your silicone molds clean and well-maintained.
Removing resin traces
To effectively remove resin traces, you can follow these steps:
- Use a specific resin solvent, such as acetone or isopropyl alcohol.
- Dip a clean cloth in the solvent and gently dab the affected area.
- If necessary, gently scrape with a plastic spatula to remove more stubborn residues.
- Repeat the process until the resin is completely eliminated.
- Finally, wash the area with water and soap to remove any solvent residues. It is important to test the solvent on a small hidden area to check its compatibility with the underlying material.
Sanitizing processing tools
To effectively sanitize processing tools, it is advisable to follow these steps:
- Cleaning: Remove dirt, residues, and grease from the tools using water and a degreasing detergent.
- Disinfection: Use a specific disinfectant for processing tools, following the manufacturer's instructions.
- Rinsing: Make sure to completely remove the disinfectant with clean water.
- Drying: Thoroughly dry the tools with clean cloths or allow them to air dry.
- Storage: Store the clean and dry tools in a clean place protected from contaminating agents. By following these guidelines, a safe and hygienic working environment is ensured.
Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.
£13.45
“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form
Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.
£22.85
Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.
£22.45
EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.
£17.85
ResinPro: one supplier for all your needs
15 years of experience at your complete disposal, supplying resins and accessories for creativity, industry, DIY, flooring and marine applications.
At your home, directly from the manufacturer!
ResinPro is the direct manufacturer of our resin range for companies and hobbyists, guaranteeing the lowest prices on the market.
Learn more
The widest range of resins in the UK!
We offer resins for every need, from artistic creations to marine and construction applications, far beyond the “limited” selection typically found in local DIY stores.
Expert technical support!
Our technicians provide free remote consulting to help you avoid mistakes and ensure you achieve the result you want — unlike “generic retailers” who sell 1,000 different products.
get a free consultationRESIN PRO is a leader in resin production and distribution!
24-hour delivery: We ship across the UK on the same day. Enjoy convenient home delivery with our appointment service—our courier will contact you in advance and deliver the package to your preferred location, or leave it at an alternative address of your choice.
Full support!
We provide continuous support from preparation to final application, including remote technical assistance, ensuring a smooth experience.
Talk with a specialist and place a phone order without registration and without credit cards!
