Removing glue from painted metal

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Removing glue from painted metal

To remove glue from painted metal, you can follow these steps:

1. Soften the glue: Use a hairdryer to gently heat the glue and make it easier to remove.
2. Scrape gently: Use a plastic spatula or sandpaper to scrape off the softened glue without damaging the paint.
3. Apply a solvent: If heating is not sufficient, you can apply a gentle solvent such as acetone or isopropyl alcohol on a soft cloth to dissolve the remaining glue.
4. Clean and dry: After removing the glue, clean the surface with water and mild soap to eliminate any solvent residues and dry it thoroughly.
5. Check the paint: Ensure that the paint has not been damaged during the process and, if necessary, restore it with a specific product.

How to Remove Glue from Metal

To remove glue from metal, you can follow these steps:

• Use a hairdryer to heat the glue and make it easier to remove with a spatula or a scraper.
• Try using acetone or a specific adhesive solvent, being careful to ventilate the area well and wear protective gloves.
• If the glue is stubborn, you can try gently rubbing with a cotton ball soaked in isopropyl alcohol.
• If there are glue residues left, you can use fine sandpaper to gently smooth them out. Always remember to test the solvents on a small hidden area of the metal to check for compatibility.

Glue on metal: how to remove it

To remove glue from metal, you can follow these steps:

1. Soften the glue: Apply heat to the surface with a hairdryer or a heat gun to soften the glue.
2. Scrape gently: Use a spatula or sandpaper to scrape off the softened glue without damaging the metal.
3. Use solvents: Try using solvents such as acetone or isopropyl alcohol to dissolve the remaining glue. Make sure to test the solvent on a small hidden area before use.
4. Clean the surface: After removing the glue, clean the metal with water and soap to eliminate any solvent residues. By following these steps carefully, you should be able to effectively remove the glue from the metal.

Method to remove glue from metal surface

To remove glue from a metal surface, you can follow these steps:

1. Soften the glue: Apply heat to the surface with a hair dryer or a heat gun to soften the glue.
2. Scrape gently: Use a spatula or sandpaper to remove the softened glue without damaging the metal.
3. Use specific solvents: Try solvents such as acetone or isopropyl alcohol to dissolve the remaining glue. Avoid aggressive solvents that may damage the metal.
4. Clean the surface: Finally, clean the metal surface thoroughly with water and detergent to remove any glue and solvent residues. By following these steps, you can effectively remove glue from a metal surface.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85