Removing glue from technical supports

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Removing glue from technical supports

To remove glue from technical supports, it is advisable to follow these steps:

1. Use a specific solvent for the type of glue used.
2. Apply the solvent on the glue and let it act for a few minutes.
3. Use a scraper or a cloth to gently remove the softened glue.
4. If necessary, repeat the process until complete removal.
5. Clean the surface with a mild detergent to remove any glue and solvent residues.
6. Ensure that the technical support is not damaged during the removal process. It is essential to test the solvent on a small hidden area of the technical support to check compatibility and avoid damage.

How to Remove Epoxy Resin from Technical Surfaces

To remove epoxy resin from technical surfaces, such as metal or plastic surfaces, you can follow these steps:

1. Scraping: Use a scraper or a spatula to remove the majority of the hardened resin.
2. Chemical Solvents: Try using solvents like acetone or isopropyl alcohol to soften the resin and make it easier to remove.
3. Hot Steam: Apply hot steam to the resin to make it more pliable and easier to remove.
4. Sandpaper: If needed, use fine-grit sandpaper to smooth out any remaining resin residue on the surface. Always remember to follow the manufacturer's instructions and work in a well-ventilated area when using chemical solvents.

Best solvents for epoxy resin on technical substrates

The most suitable solvents for cleaning epoxy resin from technical substrates are those based on acetone and isopropyl alcohol. Acetone is effective in removing fresh resin, while isopropyl alcohol is useful for eliminating any residues. It is important to follow the manufacturer's instructions and work in a well-ventilated area to avoid exposure to harmful chemicals. Additionally, it is advisable to use protective gloves and goggles during the cleaning operation. Before proceeding, make sure to test the solvent on a small area to check compatibility with the technical substrate.

Safe removal of epoxy glue from technical materials

Safe removal of epoxy glue from technical materials can be achieved by following specific steps:

1. Use a specific epoxy solvent, such as acetone or trichloroethylene.
2. Apply the solvent on the glue and let it sit for a few minutes to soften it.
3. Use a spatula or scraper to gently remove the softened glue.
4. Clean the area with a cloth soaked in solvent to eliminate any residues.
5. Finally, thoroughly wash the material with water and soap to completely remove the solvent. It is important to carefully follow the manufacturer's instructions for the solvent and work in a well-ventilated area to avoid exposure to harmful fumes.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85