Removing labels from glass bottles

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Removing labels from glass bottles

To remove labels from glass bottles, you can follow these simple steps:

1. Fill a bucket with warm water and add some dish soap.
2. Immerse the bottles in the warm water to soften the label adhesive.
3. After a few minutes, remove the bottles and gently scrape off the label with a scraper or an abrasive sponge.
4. If the adhesive persists, you can use a specific product for adhesive or label removal.
5. Finally, rinse the bottles thoroughly to remove any glue residue. By following these steps, you can easily remove labels from glass bottles without damaging them.

- Removing stickers from glass jars

To remove stickers from glass jars, you can follow a few simple steps:

1. Soaking: soak the jar in hot water to soften the adhesive.
2. Scraping: use a spatula or scraper to gently remove the sticker.
3. Cleaning: apply coconut oil or white vinegar on the area to dissolve any glue residue.
4. Washing: wash the jar with water and soap to completely eliminate any residues. Avoid aggressive solvents that could damage the glass. With patience and care, stickers can be removed without harming the glass jar.

Cleaning glue residues from glass containers

To clean glue residues from glass containers, you can follow some simple steps:

• Start by gently scraping off the glue residues with a spatula or a plastic blade.
• Next, dampen a cloth with warm water and mild detergent and gently rub on the affected surface.
• If the residues persist, you can try using acetone or isopropyl alcohol to dissolve the excess glue.
• After completely removing the glue, make sure to thoroughly wash the container with water and soap to eliminate any remaining traces.
• Finally, carefully dry the glass to prevent the formation of streaks. By following these steps, you can effectively clean glue residues from glass containers.

How to Remove Stickers from Glass Containers

To remove stickers from glass containers, you can follow these steps:

1. Fill the container with hot water and let it soak for a few minutes to soften the adhesive.
2. Use a spatula or a hard card to gently lift the corners of the sticker.
3. Apply vegetable or olive oil to the adhesive part and let it sit for a few minutes to dissolve the adhesive.
4. Use a microfiber cloth to rub off the sticker, starting from the lifted corners.
5. If necessary, repeat the process until the sticker comes off completely.
6. Finally, wash the container with water and soap to remove any oil residues. By following these steps, you can effectively remove stickers from glass containers without damaging the surface.

Techniques for Removing Labels from Transparent Bottles

To effectively remove labels from transparent bottles, follow these steps:

• Fill the bottle with hot water and let it soak for a few minutes.
• Add some dish soap and gently scrub the label.
• Use a scraper or a spatula to carefully remove the label.
• If needed, apply olive oil or acetone on the residual adhesive and let it sit before cleaning with a cloth.
• Finally, wash the bottle with water and soap to remove any residue. These methods will help you remove labels without damaging the transparent bottle.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85